N7201A653E - 第107页

NPM-TT2 EJM1EE-MB-03 M-02 3-1 -4 Periodic inspection Anti-rust and lubricant list Main grease point T ype Desi gnated lubricant name Manufacture r Touchscreen (hinge) Anti-rust and lubricant Touch lube Panasonic Smart Fa…

100%1 / 502
NPM-TT2 EJM1EE-MB-03M-02
How to use the grease gun
Applied grease list
Push the nozzle tip onto the
grease nipple
Pump the lever a few times
●To apply the prescribed amount of
grease, operate the lever in the following
positions - fully open, halfway opened, a
quarter way opened, or fully closed.
●Delivery rate, if the grease gun as an
option is in use, is 0.9 cm
3
per stroke.
Wipe off any excess grease
with a cloth
●If left unattended, the excess grease
may drop on the PCB during
production.
1
2
3
Main grease point
Grease
type
Specified
grease name
Manufacturer
XY table
(ball screw, linear bearing)
Grease LCG100 Idemitsu Kosan Co., Ltd.
Placement head
Fluorine
grease for
vacuum
BARRIERTA
IEL/V
NOK Kluber Co., Ltd.
3-1-3
Maintenance
3-1
* This picture shows how to use the grease gun.
The machine on the photo is not NPM-TT2.
Greasing 2
1
2
NPM-TT2 EJM1EE-MB-03M-02
3-1-4
Periodic
inspection
Anti-rust and lubricant list
Main grease point Type
Designated
lubricant name
Manufacturer
Touchscreen (hinge)
Anti-rust
and
lubricant
Touch lube
Panasonic Smart Factory Solutions Co.,
Ltd.
Nozzle holder (slicing surface) FL100 SUMICO LUBRICANT CO., LTD.
NPM-TT2 EJM1EE-MB-03M-02
3-2-1
Maintenance
3-2
Detaching procedure
How to handle the feeder
cart (feeder cart (option))
Press for over
three seconds
(The lamp changes from
illumination to flashing with
the buzzer sound that allows
you to detach the cart from
the machine.)
Fix the handle
Pull the feeder
cart out
1
Lift the handle up
*Please note that the feeder
cart can move 100mm
forward.
2
Lower the pipe until it
stops
*Be careful not to pinch the
feeder power cable in any
place as you lift the handle
up.
Pay full attention to your surroundings and keep a safe distance
from people around you while moving the feeder cart
(Collisions with the feeder cart may result in injury.)
WARNING
1
2
3