N7201A653E - 第123页
NPM- TT2 EJM1EE-MB-04 M-00 Clean the (whole) upper surface of the pallet As needed Maintenance 4-3-1 Tool used: Lint free cloth Time required: 2 minutes (per location) V isually check the drawer block V isually check the…
NPM-TT2 EJM1EE-MB-04M-00
After
opera-
tion
Maintenance
4-2-3
Cleaning the refuse box
(tray feeder (option))
Tool used: None Time required: 1 minute
●Clean the refuse boxes.
●Not only after operation but also during production, clean them before they are full.
4-2-3
Describes cleaning of the refuse box.
Draw out the refuse box
Empty it out
Put the refuse
box back in its
original position
2
1
3
Refuse box
●If you shake the box back and forth for several times, the
tape layer becomes flat and it may easy to draw out.
NPM-TT2 EJM1EE-MB-04M-00
Clean the (whole)
upper surface of
the pallet
As
needed
Maintenance
4-3-1
Tool used: Lint free cloth Time required: 2 minutes (per location)
Visually check
the drawer
block
Visually check
the pallet for
warps
Drawer block
Pallet upper
surface
●If you find any cracks or
chips, avoid using the
pallet.
●If it is warped, fix it.
Cleaning and inspecting
the pallet
(tray feeder pallet
(option))
2
1
3
4-3-1-1
Describes cleaning and inspecting the pallet.
Every
24
hours
PeriodicPeriodic
inspection
NPM-TT2 EJM1EE-MB-04M-00
4-3-1-2