N7201A653E - 第143页

NPM- TT2 EJ M1EE-MB-05M-0 3 5-5 OFF SERVO 1 2 4 5 SERVO ON 3 ■ 13-slot feeder ■ Feeder cart ● Clean the feed er installation face after removing feeders. (A cause of deformation in the feeder cart.) ● Clean the feed er t…

100%1 / 502
NPM-TT2 EJM1EE-MB-05M-03
Maintenance
5-4
5-4
Cleaning the cover
glass (multi-recognition camera)
5
Remove a foreign body including dust
from the cover glass
Describes cleaning of the multi-recognition camera’s cover glass.
Tool used: Lint free cloth Time required: 5 minutes (Total time required for both the front and rear sides)
3
●Be careful not to scratch
the cover glass surface
while cleaning it with a soft
lint free cloth. (Scratches
may hinder proper image
capture)
Cover glass
8
1
6
4
Push the X-axis
beam inward
OFF
SERVO
2
SERVO
ON
7
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
NPM-TT2 EJM1EE-MB-05M-03
5-5
OFF
SERVO
1
2
4
5
SERVO
ON
3
■13-slot feeder
■Feeder cart
●Clean the feeder installation face after removing feeders.
(A cause of deformation in the feeder cart.)
●Clean the feeder table using a vacuum cleaner or brush.
●Do not use an air blow gun in cleaning.
(A foreign body including dust could scatter inside the machine,
thus worsening placement quality, or breaking down the
machine.)
Cleaning the feeder table
(13-slot feeder, Feeder cart (option))
Describes cleaning of the feeder table.
Tool used: Vacuum cleaner, brush Time required: 15 minutes per location
Every
140
hours
PeriodicPeriodicPeriodic
inspection
Clean the feeder table
Feeder table
Maintenance
5-5
NPM-TT2 EJM1EE-MB-05M-03
ACTIVATION
Maintenance
5-6
5-6
Describes cleaning of the table surface of the tray feeder drawer.
Tool used: Lint free cloth Time required: 5 minutes
●Before cleaning it, ensure that the magazine is removable. (→P.6-13)
4
5
SERVO
ON
6
Tray feeder drawer
table surface
Clean the table surface
●Wipe off with a soft lint free cloth.
(The tray feeder drawer
moves to the maintenance
position)
1
2
OFF
SERVO
3
Cleaning the table surface
(tray feeder drawer (option))