N7201A653E - 第151页
EJM1EJ-MB-06 M-02 NPM-TT2 6-1 -4 Every 560 hours Periodic Periodic Periodic Periodic inspection
EJM1EJ-MB-06M-02NPM-TT2
6-1-3
5
●Make sure that there is no pin on
the PCB plate.
●Continuously moves the width
adjustment axis of the transfer
conveyor at least five round.
8
ACTIVATION
7
Confirm the message
6
Greasing the PCB
conveyor 2
Maintenance
6-1
11
STOP
10
ACTIVATION
9
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
■Select a lane;
W1 or W2
EJM1EJ-MB-06M-02NPM-TT2
6-1-4
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
EJM1EJ-MB-06M-02NPM-TT2
Describes the method for greasing the XY-axis linear guide of the XY unit.
Tool used: Grease gun, lint free cloth Time required: 24 minutes
●Grease the front and rear sides
Greasing the XY-axis
linear guide 1
6-2-1
1
2
Wipe away the old grease
●Wipe the old grease off the X-and Y-axis linear
guides with a clean lint free cloth.
X-axis linear
guide
Y-axis linear guide
Maintenance
6-2
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
3
Cover the multi-recognition camera with a
lint free cloth
●To prevent adhesion of grease dropped onto the camera
lenses during maintenance)