N7201A653E - 第18页
NPM- TT2 EJM1EE-CT-01 M-02 S-18 17 -1 Switch process -2 Preparation of switch -2-1 Power ON/OFF -2-2 Pushing the X-axis -2-3 Attach and detach method of feeder table cover -2-4 Attach and detach method of grommet -3 Name…
NPM-TT2 EJM1EE-CT-01M-02
S-17
14
Installation
15
Others
-1
Machine information
-2
Update
-2-1
Updating the machine system
-2-2
Updating the firmware
-3
Option license
-4
Common parameters
16
Reference
-1
Plastic parts listing
-1
Before installation
-2
Transportation
-3
Installation
-4
Main power connection
-4-1
Checking voltages of the primary power
supply and the machine
-4-2
Connection of main power supply
-4-3
Adjusting voltages of the primary power
supply and the machine
-5
Connection of air source and
power supply
-6
Peripheral device connection
-6-1
Line configuration
-6-2
Line signal specification
-6-3
Ethernet cables LWS (line work station)
-6-4
Cable length
-6-5
Settings when connected to LNB
-7
PCB transfer settings
(when connected to non-NPM-TT2
equipment)
-8
How to handle the tray feeder
(option)
-9
How to switch the 17-slot feeder
cart and the single tray feeder
NPM-TT2 EJM1EE-CT-01M-02
S-18
17
-1
Switch process
-2
Preparation of switch
-2-1
Power ON/OFF
-2-2
Pushing the X-axis
-2-3
Attach and detach method of feeder table
cover
-2-4
Attach and detach method of grommet
-3
Name and layout
-3-1
Parts layout installed to the feeder cart
-3-2
Parts layout when the single tray feeder is
used
-3-3
Parts layout when the 17-slot feeder cart
is used
-4
Switch from the single tray
feeder to the 17-slot feeder cart
-5
Switch from the 17-slot feeder
cart to the single tray feeder
Appendix
1
1 Confirmation