N7201A653E - 第187页
EJM1EJ-MB-06 M-02 NPM-TT2 Tool used: Swabs (MTNZ0 01268AA), Allen wrench (3 mm) Time required: 3 minutes Extension conveyor (option) 1 3 2 OFF SERVO 1 6-9 -6 Every 560 hours Periodic Periodic Periodic Periodic inspection…
EJM1EJ-MB-06M-02NPM-TT2
PCB conveyor 3
6-9-5
5
Cleaning the PCB
detection sensors 3
Maintenance
6-9
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
EJM1EJ-MB-06M-02NPM-TT2
Tool used: Swabs (MTNZ001268AA), Allen wrench (3 mm)
Time required: 3 minutes
Extension conveyor (option) 1
3
2
OFF
SERVO
1
6-9-6
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
Adjust the
conveyor width
of 150 mm(For
better
workability)
(→[Operating
procedure] P.2-5-4)
Remove the
upper cover
●See step for bolt
position.
4
●Loosen the bolts of the
cover with the Allen
wrench and remove the
cover.
To
4
EJM1EJ-MB-06M-02NPM-TT2
Extension conveyor (option) 2
4
6-9-7
Cleaning the PCB
detection sensors 4
Maintenance
6-9
■Sensor position installed to the Left side
Three bolts
A
Three bolts
Extension
conveyor
(Reflection type)
PCB detection sensor
View on arrow A
Verify the location and type of each PCB detection sensor.
●PCB detection sensor
Reflection type: Two sets