N7201A653E - 第197页
EJM1EJ-MB-06 M-02 NPM- TT2 To 10 6-13 -2 1 ACTIVATION (The tray feeder drawer moves to the maintenance position.) 2 OFF SERVO 3 OFF SERVO 8 Open the magazine cover and remove the upper magazine 9 (→[Oper ating procedure]…
EJM1EJ-MB-06M-02NPM-TT2
Describes how to apply grease.
Tool used: Grease gun Time required: 20 minutes
Greasing the tray feeder
(option) 1
6-13-1
4
Apply grease via grease nipples to the vertical-axis ball screw and the linear
guide for the lifter
●Apply grease via grease nipples
with a grease gun.
Give two pumps for each (Approx.
1.8cm
3
)
●Grease: LCG100
Ball screw
Grease nipple
5
SERVO
ON
6
ACTIVATION
7
Maintenance
6-13
EJM1EJ-MB-06M-02NPM-TT2
To
10
6-13-2
1
ACTIVATION
(The tray feeder drawer
moves to the maintenance
position.)
2
OFF
SERVO
3
OFF
SERVO
8
Open the
magazine cover
and remove the
upper magazine
9
(→[Operating procedure]
P.2-4-2)
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
EJM1EJ-MB-06M-02NPM-TT2
Greasing to the tray
feeder
(option) 2
6-13-3
10
Apply grease to each point of the tray feeder drawer
Linear guide
(right and left)
Inside of cam block (left)
●Greasing points
・Linear guide rails (right and left)
・Inside of cam blocks (right and left)
●Grease:LCG100
Inside of cam block (right)
SERVO
ON
15
16
ACTIVATION
17
Have it run for about a
minute, and then
Maintenance
6-13
●Be careful not to adhere grease to the belt
drawer.
Front