N7201A653E - 第208页

EJM1EJ-MB-06 M-02 NPM-TT2 Maintenance 6-20 Cleaning the XY -axis ca ble bear er 1 OFF SERVO 3 2 9 7 SERVO ON 8 6 6-20 -1 Describes how to clean cable bea rs on the X-axis and Y-axis. Tool used : Lint free cloth Time requ…

100%1 / 502
EJM1EJ-MB-06M-02NPM-TT2
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
8
Cleaning the light-emitting
and light-receiving sections
(height sensor (option))
3
Cleaning the light-emitting and
light-receiving sections
●Wipe off with a soft lint free cloth.
(If this part gets scratched, the
height sensor may not function
properly)
Describes cleaning of the light-emitting and light-receiving sections of the height sensor (option).
Tool used: Lint free cloth, Time required: 5 minutes per location
4
OFF
SERVO
1 2 3
5
6 7
Maintenance
6-19
(Picture seem from below)
Light-emitting
and light-
receiving
sections
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Push the X-axis
inward
SERVO
ON
6-19-1
EJM1EJ-MB-06M-02NPM-TT2
Maintenance
6-20
Cleaning the XY-axis
cable bearer
1
OFF
SERVO
3
2
9
7
SERVO
ON
8
6
6-20-1
Describes how to clean cable bears on the X-axis and Y-axis.
Tool used: Lint free cloth
Time required: 10 minutes
Move the placement head
and X-axis to the position
where they do not hit the
mechanical stopper
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
EJM1EJ-MB-06M-02NPM-TT2
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
6-20-2
Clean the cable bear on the X-axis
4
●Move the placement head in the X-
direction and wipe off any adhesion on the
cable bear using a lint free cloth.
●Move the placement head to the right and
wipe off any dust on the bracket using a
lint free cloth.
5
Clean the cable bear on the Y-axis
●Move the X-axis beam in the Y-direction
and wipe off any adhesion on the cable
bear using a lint free cloth.
●Push the X-axis beam inward and wipe off
any dust on the bracket using a lint free
cloth.
Bracket
Bracket