N7201A653E - 第241页
NPM- TT2 EJM1EE-MB-11 M-02 11 - 1 -2 Replacement ■ Labels attached to the lightweight 16-nozzle head Note that there are two types of the lightweight 16-nozzle head s, and the color and app earance of the labels differ f…
NPM-TT2 EJM1EE-MB-11M-02
Maintenance
11-1
11-1-1
Head and nozzle
changer replacement 1
Head compatibility
*1): Refer to the table on the next page for the model IDs and model Nos.
*2): Refer to the table on the next page for the positions of the labels and checking method.
Model ID
*1)
Lightweight
16-nozzle head V2
Lightweight
16-nozzle head
16-nozzle
head
12-
nozzle
head
Lightweight
8-nozzle
head
8-nozzle
headLabel color
*2)
Green Blue
NPM-WX
○×××○×
NPM-WXS
○×××○×
NPM-DX
○×××○×
NPM-D3
○○○○○○
NPM-D2
××○○×○
NPM-D
××○○×○
NPM
××○○×○
NPM-W2
○○○○○×
NPM-W2S
○○×○○×
NPM-W
××○○×○
NPM-TT2
××××○○
NPM-TT
×××××○
VM101
○×××○×
Model ID
*1)
4-nozzle
head
3-nozzle
headV2
3-nozzle
head
2-nozzle
head
Dispens-
ing head
Inspection
head
NPM-WX
○○ ××××
NPM-WXS
○○ ××××
NPM-DX
○× ××××
NPM-D3
×× ×○○○
NPM-D2
×× ×○○○
NPM-D
×× ×○○○
NPM
×× ×○○○
NPM-W2
×○ ××○○
NPM-W2S
×○ ××××
NPM-W
×○ ○×○○
NPM-TT2
×○ ○×××
NPM-TT
×× ○×××
VM101
○× ××××
The head for NPM series and the one for NPM X series basically differ from one another.
So, when you replace the head, be sure to check head compatibility.
Before replacing, check whether the head to install is acceptable.
NPM-TT2 EJM1EE-MB-11M-02
11-1-2
Replacement
■Labels attached to the lightweight 16-nozzle head
Note that there are two types of the lightweight 16-nozzle heads, and the color and appearance of the
labels differ for easy identification.
Lightweight 16-nozzle head V2 Lightweight 16-nozzle head
Background Green Blue
Letters White White
Label
appearance
Reference: List of the model IDs and model Nos.
LIGHT WEGHT 16-NOZZLE HEAD V2
LIGHT WEGHT 16-NOZZLE HEAD
Model ID
Model No.
NPM
NM-EJM9B
NM-EJM9B -MA
NM-EJM9B -MD
NPM-D
NM-EJM1D
NM-EJM1D-MA
NM-EJM1D-MD
NPM-D2
NM-EJM5D
NM-EJM5D-MA
NM-EJM5D-MD
NPM-D3
NM-EJM6D
NM-EJM6D-MA
NM-EJM6D-MD
Model ID
Model No.
NPM-W
NM-EJM2D
NM-EJM2D-MA
NM-EJM2D-MD
NPM-W2
NM-EJM7D
NM-EJM7D-MA
NM-EJM7D-MD
NPM-W2S NM-EJM5E
NPM-TT NM-EJM3D
NPM-TT2 NM-EJM1E
NPM-DX NM-EJM8D
NPM-WX NM-EJM9D
NPM-WXS NM-EJM2E
VM101 NM-EJM3E
NPM-TT2 EJM1EE-MB-11M-02
Describes the handling method of a placement head.
Tool used: Torque wrench (N510050388AA), long bit (Hex. opposite side of 5 mm, N510046662AA)
Time required: 10 minutes
1
Maintenance
11-1
6
Remove the head
●Hold the handle in the upper art
of the head, and detach the
head with paying attention not to
let it interfere with the cover.
●Store the detached heads on the
head stand.
Type Weight
8-nozzle head
8.3 kg
3-nozzle head
8.6 kg
■Weight of heads
2
Removing a head
Ensure that
the connector
section is
disconnected
●Push and lean the upper part of the head
to the rear to work.
●The head-stopper sections (one each on
the right and the left) prevent the head
from dropping into the machine.
5
Remove the connector
Head stopper
11-1-3
Turn OFF the
power and lock
the machine
OFF
3
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Head and nozzle
changer replacement 2