N7201A653E - 第242页
NPM- TT2 EJ M1EE-MB-11M-0 2 Descr ibes the handling method of a placement head. Tool used: Torque wre nch (N510050388AA), long bit (Hex. opposi te side of 5 mm, N510046 662AA) Time required: 10 minutes 1 Maintenance 11 -…
NPM-TT2 EJM1EE-MB-11M-02
11-1-2
Replacement
■Labels attached to the lightweight 16-nozzle head
Note that there are two types of the lightweight 16-nozzle heads, and the color and appearance of the
labels differ for easy identification.
Lightweight 16-nozzle head V2 Lightweight 16-nozzle head
Background Green Blue
Letters White White
Label
appearance
Reference: List of the model IDs and model Nos.
LIGHT WEGHT 16-NOZZLE HEAD V2
LIGHT WEGHT 16-NOZZLE HEAD
Model ID
Model No.
NPM
NM-EJM9B
NM-EJM9B -MA
NM-EJM9B -MD
NPM-D
NM-EJM1D
NM-EJM1D-MA
NM-EJM1D-MD
NPM-D2
NM-EJM5D
NM-EJM5D-MA
NM-EJM5D-MD
NPM-D3
NM-EJM6D
NM-EJM6D-MA
NM-EJM6D-MD
Model ID
Model No.
NPM-W
NM-EJM2D
NM-EJM2D-MA
NM-EJM2D-MD
NPM-W2
NM-EJM7D
NM-EJM7D-MA
NM-EJM7D-MD
NPM-W2S NM-EJM5E
NPM-TT NM-EJM3D
NPM-TT2 NM-EJM1E
NPM-DX NM-EJM8D
NPM-WX NM-EJM9D
NPM-WXS NM-EJM2E
VM101 NM-EJM3E
NPM-TT2 EJM1EE-MB-11M-02
Describes the handling method of a placement head.
Tool used: Torque wrench (N510050388AA), long bit (Hex. opposite side of 5 mm, N510046662AA)
Time required: 10 minutes
1
Maintenance
11-1
6
Remove the head
●Hold the handle in the upper art
of the head, and detach the
head with paying attention not to
let it interfere with the cover.
●Store the detached heads on the
head stand.
Type Weight
8-nozzle head
8.3 kg
3-nozzle head
8.6 kg
■Weight of heads
2
Removing a head
Ensure that
the connector
section is
disconnected
●Push and lean the upper part of the head
to the rear to work.
●The head-stopper sections (one each on
the right and the left) prevent the head
from dropping into the machine.
5
Remove the connector
Head stopper
11-1-3
Turn OFF the
power and lock
the machine
OFF
3
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Head and nozzle
changer replacement 2
NPM-TT2 EJM1EE-MB-11M-02
11-1-4
Replacement
4
Loosen the head fixing bolts
●Open the shutter and move
the head to the position
where you can see the bolts.
shutter
Loosen the bolt
Lower right of head
1
Upper right of head
3
Upper left of head
4
Lower left of head
2
Head unit
●For bolts on the upper right of the head, make sure that the screw part of the bolt is
completely removed after sliding the head unit far side of the machine. If the installation
surface is closely attached, entire screw part may not be removed.
●Remove four fixing bolts in the order of to ( ). If you remove the bolts in the
wrong order, the fixing bolts and taps may be damaged.
1
4
3