N7201A653E - 第245页
NPM- TT2 EJM1EE-MB-11 M-02 11 - 1 -6 Replacement
NPM-TT2 EJM1EE-MB-11M-02
Maintenance
11-1
11-1-5
Head and nozzle
changer replacement 3
Precautions in placing the head temporarily
CAUTION
NOTICE
Prepare a workbench (0.9 to1.2 m in height) on your own to place the head temporarily.
The removed head should be kept in the head stand or the head storing box (below left).
◆ Head storing box
Model No.: MTKA009253AA
◆ Head stand (option)
Model No.: N610124224AB
Handle the head carefully when carrying it
(Risk of injury due to drop/Risk of back pain)
Appearance of the
stand
10 mm hole x 2 No 10 mm hole
Lightweight
16-nozzle head V2
○ (Applicable) ○ (Applicable)
Lightweight
8-nozzle head
○ (Applicable) Ｘ (Not applicable)
4-nozzle head
○ (Applicable) Ｘ (Not applicable)
3-nozzle head V2
○ (Applicable) Ｘ (Not applicable)
No hole
Be sure to use the head stand (Model No.: 610124224AB) shown above to place the lightweight
8-nozzle head and 4-nozzle head temporarily.
(Model No. is affixed on the nameplate.)
The head stand comes in two types: the one to which lightweight 8-nozzle head, 4-nozzle head
and 3-nozzle head V2 are applicable, and the other to which they are not applicable.
See the table below to find the applicability of the heads.
10mm hole (x2)
NPM-TT2 EJM1EE-MB-11M-02
11-1-6
Replacement
NPM-TT2 EJM1EE-MB-11M-02
Time required:10 minutes (Time taking to install a head)
Attaching a head 1
11-1-7
1 2
Turn OFF the
power and lock
the machine
OFF
3
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
NOTICE
When the BGA or CSP is attached
with the 8-nozzle head or 3-nozzle
head, make sure that the multi-
recognition camera unit has a lateral
lighting attached to it.
Lateral lighting
Multi-recognition camera unit
5
Pull the head to the front to insert the
connector section
Connector
Head plate
●Head stopper: (one
each on right and left)
Head stopper
●Hold the handle in the upper part of the head, and hook the head
stopper to X-axis plate with paying attention not to let it interfere with
the cover.
●Confirm the installation surface for any foreign objects beforehand.
X-axis plate
4
Install the head
Maintenance
11-1
Head and nozzle
changer replacement 4