N7201A653E - 第260页
NPM- TT2 EJ M1EE-MB-11M-0 2 1 1-2-1 -9 1 3 + (The message of removing the support pin unit is displayed) 4 Detach the feeder cart Confirm the message 2 + (→P.3-2) Confirm the message 6 5 Open the safety cover 7 Open the …
NPM-TT2 EJM1EE-MB-11M-02
11-2-1-8
16
+
(The message to shut down the power
is displayed)
Turn OFF the main
power switch
Replacement
OFF
17
16
NPM-TT2 EJM1EE-MB-11M-02
11-2-1-9
1
3
+
(The message of removing the support
pin unit is displayed)
4
Detach the feeder cart
Confirm the message
2
+
(→P.3-2)
Confirm the message
6
5
Open the safety cover
7
Open the feeder table cover
Mode
switch
Maintenance
11-2-1
Switching to the single
lane mode 5
(The PCB-support block on the part of
the machine operated goes up so that
it is ready to be removed)
Feeder carts on both front and rear sides 1
Servo switch OFF
1
2
3
NPM-TT2 EJM1EE-MB-11M-02
11-2-1-10
Replacement
Remove the PCB support block
(Both lane 1 and 2)
PCB support block
②Pull out the PCB support block.
①From the operator side, lift the right and
left levers.
Removal lever
Removal lever
●Draw it out slowly with both hands.
●Be careful not to drop a foreign body
on the Multi-recognition camera
(LED lighting) or bump it.
8
10
11
9
Close the safety cover
Close the feeder table cover
Servo switch ON