N7201A653E - 第270页
NPM- TT2 EJM1EE-MB -12M-04 R eplacing the tr ansfer belt of the PCB tr ansfer con v eyor 1 Describes the procedu re for replacin g the transfer belt of the PCB transfer conve yor system on the front of the machine. Tool …
12 Consumable parts
replacement
NPM-TT2 EJM1EE-MB-12M-04
Replacing the transfer belt of
the PCB transfer conveyor 1
Describes the procedure for replacing the transfer belt of the PCB transfer conveyor system on the front of the
machine.
Tool used: Allen wrench (2 mm) Time required: 30 to 60 minutes
Maintenance
12-1
12-1-1
1
2
Set the conveyor
width to 150 mm
(To improve
workability)
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
3
OFF
Turn OFF the
power and lock
the machine
4
5
Push the X-axis
inward
(→[ Operating
Procedure] P. 2-5-4)
6
●Two
Screws:
M4
Remove the
feeder table
cover (→P.3-3)
NPM-TT2 EJM1EE-MB-12M-04
12-1-2
Remove the belt
■6 belts on each lane
Movable side
Fixed side
Movable side
Fixed side
Lane 1
Lane 2
To
Consumable parts
replacement
8
9
7
Loosen screws on the plate and slide the plate
Plate Plate
●Six screws ●Do not remove the plate.
●Remove it, pulling out towards you.
●If disposing of the belt, you may
cut it with a wire cutter or nippers
to remove.
Belt