N7201A653E - 第281页
NPM- TT2 EJM1EE-MB -12M-04 12-3 -4 Consumable parts replacement
NPM-TT2 EJM1EE-MB-12M-04
Replacing the CPU board battery
Replacing the
batteries 2
12-3-3
Maintenance
12-3
●If voltage drops within the normal usage period, please contact us.
NPM-TT2 EJM1EE-MB-12M-04
12-3-4
Consumable parts
replacement
NPM-TT2 EJM1EE-MB-12M-04
Replacing the NCIO board battery
Replacing the
batteries 3
6
Tool used: Phillips screwdriver Time required: 30 minutes
●Please replace the battery within two hours.
●Slide the board onto the guide
and pull up the top and bottom
levers inwards to set it.
●Connect the cable.
●Screw (2 pcs) tightening torque:
240 ±20 cNꞏm
5
Replace the battery with a new one
Install the NCIO board
12-3-5
7
Maintenance
12-3
1
2
Detach the cover
Cover
●Eight screws
(Front)
Attach the cover
Detach the tray
feeder or the
feeder cart
on the front
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
●Use N610156136AA or
equivalent as a replacement
battery.
●Secure the new battery to the
board using two tie wraps
(2.5 mm or less in width, and
UL94V-0 rated (flameproof)
or equivalent).
●Connect the connector
Battery
■Connection cross-section
Tie wrap NCIO board
Battery
Tied part
●When you tie the battery, the tied part of the tie wraps should
not be higher than the battery.
●After tied, trim the excess tie wrap with a nippers.
●Eight screws
(Front)
Cover