N7201A653E - 第294页
NPM- TT2 EJM1EE-MB -12M-04 12-5 -1 R eplacing the air filter element of the placement head (8-nozzle head) 1 1 2 9 8 Air filter element O-ring Filter 7 Swab 10 Tube 11 Describes how to replace an air filter element of th…
NPM-TT2 EJM1EE-MB-12M-04
12-4-4
Consumable parts
replacement
NPM-TT2 EJM1EE-MB-12M-04
12-5-1
Replacing the air filter
element of the placement
head
(8-nozzle head) 1
1
2
9
8
Air filter element
O-ring
Filter
7
Swab
10
Tube
11
Describes how to replace an air filter element of the placement head (8-nozzle head).
Tool used: Torque wrench (N510050388AA), Long type bit (Hex. side 5 mm, N510046662AA),
Allen wrench (2.5 mm), Allen wrench (2 mm) Spanner (7 mm)
Time required: 130 minutes (per head) Life time (reference): 6000 [ h ]
Detach the head
(→P.11-1)
Remove the bracket
●Four screws
Two on the front
Two on the rear
Tool used: Allen wrench (2.5 mm)
Clean inside the
filter using a
swab
Replace the air filter element
Assemble the
filter
Tool used:
Spanner (7 mm)
Allen wrench (2 mm)
Attach the filter
Tool used: Spanner (7mm)
●8 locations
Attach the tube
●8 locations
●Air filter element product No.:
N510068213AA
●Be careful of handling an air filter
element when replacing it.
(→P.12-4
-3)
●O-ring product No.:
N510059865AA
●Confirm whether the O-ring is
deteriorated. If so, replace it.
Maintenance
12-5
NPM-TT2 EJM1EE-MB-12M-04
12-5-2
Consumable parts
replacement
12 13
3 4
6
Filter
Allen wrench
Spanner
5
Tube
Filter
Remove screws for the wiring
fixing bracket
Tool used: Allen wrench(2.5 mm)
●Four screws
Remove the tube
●8 locations
Remove the filter
●8 locations
Tool used: Spanner (7 mm)
Disassemble the filter
Tool used: Spanner (7 mm), Allen wrench(2 mm)
●Disassemble the filter using the spanner Allen wrench
●Condition after
disassembly
Attach the screws for the wiring fixing
bracket and attach the bracket
●Four screws (Two on each
sides)
Tool used: Allen wrench (2.5 mm)
●Four screws
Attach the head
and perform
calibration
(→P.11-1)