N7201A653E - 第299页
NPM- TT2 EJM1EE-MB -12M-04 12-6 -4 Consumable parts replacement
NPM-TT2 EJM1EE-MB-12M-04
12-6-3
Replacing the air filter
element of the placement
head (3-nozzle head V2) 2
Maintenance
12-6
8
Attach the joint
●Push the lever and attach
the filter together with the
joint.
●Pull the joint lightly and
make sure it will not come
off.
9
11
10
ON
SERVO
ON
NPM-TT2 EJM1EE-MB-12M-04
12-6-4
Consumable parts
replacement
NPM-TT2 EJM1EE-MB-12M-04
12-7-1
7
Limited-life(reference)：6000[h]
1
6
Describes the procedure for replacing the air filter element of the placement head (3-nozzle head).
Tool used: Allen wrench (2.5 mm) or Allen key driver (N510046569AA) included in the maintenance jig set
(option), swab
Time required: 10 minutes (per head)
Remove the
caps
●Three locations
●Be careful about
dropping the caps.
Clean inside the
filter with a
cotton swab
●Do not use an air blow gun.
Replacing the air filter
element of the placement
head (3-nozzle head)
Maintenance
12-7
8
Cap
O-ring
Replace the air filter element
●Air filter element product
No.: N510059196AA
●Be careful of handling an air
filter element when replacing
it.(→P.12-4
-3)
●O-ring product
No.: N510059865AA
●Confirm whether the O-ring is
deteriorated. If so, replace it.
Air filter element
●Three locations
●Be careful about dropping
the cap.
●Tightening torque
: 0.5 ±0.1 N・m
Attach the caps
9