N7201A653E - 第410页
NPM- TT2 EJ M1EE-MB-13M-0 2 1 Accuracy verifica- tion 2 (Automatic r un end s) + 13-15-2 -5 Detailed pr ocess 3 ● Chip component 0 .040 mm Odd form com ponent 0.030 mm 3 4 5 Switch it w ith ■ When you do not end Maintena…
NPM-TT2 EJM1EE-MB-13M-02
ACTIVATION
13-15-2-4
Calibration
Checking and reflection of placement (placement)
321
(First layer)
(Second layer)
4
8
7
Do not press the STOP button
while accuracy verification is
carried out.
You cannot restart operation in
the middle of accuracy
verification.
NOTICE
6
Load glass PCB
●Production starts as the
glass PCB is loaded
upon completion of
production preparation.
If the machine is coupled to
another machine, adjust the PCB
width of the adjacent machine to
216 mm, and load the PCB into
the upstream machine.
NOTICE
Confirm the
message
5
●The head camera screen
appears and you can view
the part being measured.
●To use accuracy verification
MCDATA:
(→ P.13-15-1
-1 ‘■Reflection
of verification data’)
ACTIVATION
NPM-TT2 EJM1EE-MB-13M-02
1
Accuracy
verifica-
tion
2
(Automatic run ends)
+
13-15-2-5
Detailed process 3
●Chip component 0.040 mm
Odd form component 0.030 mm
3
4
5
Switch it with
■When you do not end
Maintenance
13-15-2
Checking and reflection of placement (checking placement results)
2
3
4
5
Upon completion of placement,
NPM-TT2 EJM1EE-MB-13M-02
13-15-2-6
Calibration
8
9
Choose a nozzle to display
(Offset per nozzle is displayed)
Choose a table to display
10
6
Choose a table
(Displays the accuracy of the front and
the rear individually or the total
accuracy)
●Cpk prescribed values per component
(→ P.6-1-1 ‘Basic performance’ in
[Operating procedure] )
A
Cpk
●If the measurement result Cpk is lower
than the prescribed value, Angle Offset
is reflected.
7
■To reflect placement offset
Offset per nozzle is displayed
B
X[mm], Y[mm], θ[°]
■To reflect the verification data
11
■
For
■
For other than
8 910
11
B
6
7
A
12
13
To
To
Choose a placed part
●Displayed based on the part type.
●Confirm the message
To use accuracy verification MCDATA:
(→ P.13-15-1
-1 ‘■Reflection of
verification data’)