N7201A653E - 第411页
NPM- TT2 EJ M1EE-MB-13M-0 2 13-15-2 -6 Calibration 8 9 Choose a nozzle to display (Offset per nozzle is displaye d) Choose a table to display 10 6 Choose a table (Displays the accuracy of the front and the rear individua…
NPM-TT2 EJM1EE-MB-13M-02
1
Accuracy
verifica-
tion
2
(Automatic run ends)
+
13-15-2-5
Detailed process 3
●Chip component 0.040 mm
Odd form component 0.030 mm
3
4
5
Switch it with
■When you do not end
Maintenance
13-15-2
Checking and reflection of placement (checking placement results)
2
3
4
5
Upon completion of placement,
NPM-TT2 EJM1EE-MB-13M-02
13-15-2-6
Calibration
8
9
Choose a nozzle to display
(Offset per nozzle is displayed)
Choose a table to display
10
6
Choose a table
(Displays the accuracy of the front and
the rear individually or the total
accuracy)
●Cpk prescribed values per component
(→ P.6-1-1 ‘Basic performance’ in
[Operating procedure] )
A
Cpk
●If the measurement result Cpk is lower
than the prescribed value, Angle Offset
is reflected.
7
■To reflect placement offset
Offset per nozzle is displayed
B
X[mm], Y[mm], θ[°]
■To reflect the verification data
11
■
For
■
For other than
8 910
11
B
6
7
A
12
13
To
To
Choose a placed part
●Displayed based on the part type.
●Confirm the message
To use accuracy verification MCDATA:
(→ P.13-15-1
-1 ‘■Reflection of
verification data’)
NPM-TT2 EJM1EE-MB-13M-02
13-15-2-7
Accuracy
verifica-
tion
Detailed process 4
Maintenance
13-15-2
12
(The data is reflected and machine
parameters are updated)
●Regardless of the table
selected for data display
・All heads
・Nozzle offset
are updated.
ATTENTION
12
Confirm the message
Confirm the message
13
●When you do not save the data
13
Checking the placement result (reflection of verification data, offset registration)
●It can be remounted so that you can check the placement accuracy.
In doing so, please do [Checking the placement result] . (→P.13-15-2
-8)
●For a part up to the size of the 0402
chip
●For a part larger in size than the
0402 chip