N7201A653E - 第453页
NPM- TT2 EJ M1EE-MB-14M-0 2 14-9 -8 20 Attach the extension drawer ● Screw: M6 2 locations Insert the pins of the connector to the holes of the exten sion drawer to position Pin Remove the screws 21 Insert the safety cov…
NPM-TT2 EJM1EE-MB-14M-02
14-9-7
Maintenance
14-9
How to switch the 17-slot
feeder cart and the single
tray feeder 4
①Switching the single tray feeder to the 17-slot feeder cart 3
22
Insert the metal fitting of the safety cover to
the safety switch
23
Attach the
feeder table
cover
●Screw: M4
2 locations
19
Remove the short connector and install the cables and pipes of the cart
drive unit
Short connector
Store the removed short connector to the switch cart (→P.14-9-1)
24
25
ON
Unlock the
machine and
Metal fitting
Attach the feeder
cart
(→P.3-2)
26
Cable, pipe
NPM-TT2 EJM1EE-MB-14M-02
14-9-8
20
Attach the extension drawer
●Screw: M6 2 locations
Insert the pins of the connector to
the holes of the extension drawer
to position
Pin
Remove the screws
21
Insert the safety cover from the top to install
●Screw: M6 2 locations
Store the removed screws
to the switch cart
(→P.14-9-1)
Tighten the screws
●Screw: M6
2 locations
Safety cover
Installation
Pin
Align the position of pins and
seals and tighten the screws
Seal
NPM-TT2 EJM1EE-MB-14M-02
14-9-9
Maintenance
14-9
How to switch the 17-slot
feeder cart and the single
tray feeder 5
②Switching the 17-slot feeder cart to the single tray feeder 1
This explains how to switch between the 17-slot feeder cart and single tray feeder.
1
Turn OFF the
power and lock
the machine
Time required: 30 minutes
Tool used: Spanner 30 mm (2), Allen wrench (3 mm, 4 mm, 5 mm, 8 mm)
9
2
3
OFF
Detach the feeder
cart
Remove the extension drawer
Remove the cable and pipe of the cart drive unit and install the short
connector
(→P.3-2)
Loosen the screws
Short connector
8
●Screw: M6
2 locations
Store the removed extension drawer to the switch cart (→P.14-9-1)
Remove the extension drawer
Removed state
Pin
Put and tighten the screws