N7201A653E - 第494页
NPM- TT2 EJM1E E-MB-17M-00 Switc h fr om the single tr ay feeder to the 17-slot f eeder car t 3 Maintenance 17-4 Install the guides (tw o types) Install the cart drive unit B A ① ② ① Place the edge of the drive unit on t…
NPM-TT2 EJM1EE-MB-17M-00
Detach the tray feeder
Switch the sensor
①Detach the tray feeder ②Remove the cover and install in such a way that the connectors are
covered (3 mm Allen wrench)
Loosen the knob and
fix it at the CHANGE
position
Loosen screws all the
way (3 mm Allen
wrench)
Hold the bracket knob
and lower it approx. 10
mm
①
②
Detach the feeder table
cover(→ P.17-2-3)
Loosen the knob and
temporarily fix it at the
CART position
①Tighten the
screws (3 mm
Allen wrench)
①
②
②Finally
tighten the
knob
①
Attach the grommet
(→P.17-2-4)
●2 locations
●2 locations
17-4-2
5
6 7
Screw
(2)
Cover
Screw(3)
8
Knob
Switch from the single
tray feeder to the 17-slot
feeder cart 2
Maintenance
17-4
NPM-TT2 EJM1EE-MB-17M-00
Switch from the single
tray feeder to the 17-slot
feeder cart 3
Maintenance
17-4
Install the guides (two types)
Install the cart drive unit
B
A
①
②
①Place the edge of the drive unit on the Pin A
②Rotate the drive unit in a clockwise direction
to fit into the pin B
Use (a) Cart drive unit of the feeder cart (→P.17-3-1)
Use (b) Drive guide and (c) Cart guide of the switch cart (→P.17-3-1)
Store the removed (f) Short connector in the
part box of the switch cart (→P.17-3-1)
17-4-3
9
10
③Tighten the screws (8 mm Allen wrench)
●2 locations
④Remove the shot connector on the right
side and connect the connector in
accordance with its shape
(c)Cart guide
(b)Drive guide
①Align the pin and seal positions
② Tighten the screws to secure
(4mm Allen wrench)
●3 locations
①Align the seal position
②Tighten the screws to secure
(4mm Allen wrench)
●3 locations
④
③
NPM-TT2 EJM1EE-MB-17M-00
Attach the extension drawer
Attach the safety cover
①Remove the screws
(5 mm Allen wrench)
●2 locations
③Tighten the screws
(5 mm Allen wrench)
●2 locations
①Insert the safety cover from
the top
③Insert the metal part of the
safety cover to the safety
switch
②Adjust the pin and seal position s
and tighten the screws
(5mmAllen wrench) ●2 locations
②Place the
extension drawer
and adjust the
position with pins
Attach the feeder table
cover (→ P.17-2-3)
Close the safety cover
Power ON (→P.17-2-1)
Attach the 17-slot feeder cart
and switching is complete
Use (e) Extension drawer of the switch cart (→P.17-3-1)
Use (d) Safety cover of the switch cart (→P.17-3-1)
Store the removed screws in the switch cart (→P.17-3-1)
①
②
③
17-4-4
13
11
12
14
15
16
Pin
Screw
Seal
Switch from the single
tray feeder to the 17-slot
feeder cart 4
Maintenance
17-4