N7201A653E - 第495页
NPM- TT2 EJM1 EE-MB-17M-00 Attach the extension drawer Attach the safety cover ① Remove the screws (5 mm Allen wrench) ● 2 locations ③ Tighten the screws (5 mm Allen w rench) ● 2 locations ① Insert the safety cover from …
NPM-TT2 EJM1EE-MB-17M-00
Switch from the single
tray feeder to the 17-slot
feeder cart 3
Maintenance
17-4
Install the guides (two types)
Install the cart drive unit
B
A
①
②
①Place the edge of the drive unit on the Pin A
②Rotate the drive unit in a clockwise direction
to fit into the pin B
Use (a) Cart drive unit of the feeder cart (→P.17-3-1)
Use (b) Drive guide and (c) Cart guide of the switch cart (→P.17-3-1)
Store the removed (f) Short connector in the
part box of the switch cart (→P.17-3-1)
17-4-3
9
10
③Tighten the screws (8 mm Allen wrench)
●2 locations
④Remove the shot connector on the right
side and connect the connector in
accordance with its shape
(c)Cart guide
(b)Drive guide
①Align the pin and seal positions
② Tighten the screws to secure
(4mm Allen wrench)
●3 locations
①Align the seal position
②Tighten the screws to secure
(4mm Allen wrench)
●3 locations
④
③
NPM-TT2 EJM1EE-MB-17M-00
Attach the extension drawer
Attach the safety cover
①Remove the screws
(5 mm Allen wrench)
●2 locations
③Tighten the screws
(5 mm Allen wrench)
●2 locations
①Insert the safety cover from
the top
③Insert the metal part of the
safety cover to the safety
switch
②Adjust the pin and seal position s
and tighten the screws
(5mmAllen wrench) ●2 locations
②Place the
extension drawer
and adjust the
position with pins
Attach the feeder table
cover (→ P.17-2-3)
Close the safety cover
Power ON (→P.17-2-1)
Attach the 17-slot feeder cart
and switching is complete
Use (e) Extension drawer of the switch cart (→P.17-3-1)
Use (d) Safety cover of the switch cart (→P.17-3-1)
Store the removed screws in the switch cart (→P.17-3-1)
①
②
③
17-4-4
13
11
12
14
15
16
Pin
Screw
Seal
Switch from the single
tray feeder to the 17-slot
feeder cart 4
Maintenance
17-4
NPM-TT2 EJM1EE-MB-17M-00
Switch from the 17-slot
feeder cart to the single
tray feeder 1
Describes the procedure for switching from the 17-slot feeder cart to the tray feeder.
Maintenance
17-5
Turn OFF the power
(→ P.17-2-1)
Detach the feeder cart
Push the X-axis
inward (→P.17-2-2)
Detach the feeder table
cover (→P.17-2-3)
Detach the safety cover
③Pull the safety cover upward
to remove
①Release the safety switch
①
②
③
②Loosen the screw
(5 mm Allen wrench)
●2 locations
Store the removed (d) Safety cover in the switch cart (→P.17-3-1)
17-5-1
1 2
3
4
5