MAN00000772_SI-G200BB_SVCPDFA - 第107页
Install Tray Unit (Including machine modification) SHEET 68/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) 5 Move to a position where clearance between the S axis pin and the tray p allet is 0.1[m…
Install Tray Unit (Including machine modification)
SHEET
67/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[S axis setup]
[Necessary jig]
・Tray Pallet
・Thickness gauge(0.1[mm])
1 Set a pallet to the No.Z501, Z515, Z601, Z615
and return it to the origin.
NOTE:
Slightly press the tray pallet against the supply side.
2 Move Supply height to Z601 by use manual
operation mode.
NOTE:
Select the S-axis state to storage.
3 Open the Tray Offset screen for M/C Setup.
4 Press the S axis button with the
“Retrograde“ being selected.
Install Tray Unit (Including machine modification)
SHEET
68/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
5 Move to a position where clearance between the S
axis pin and the tray pallet is 0.1[mm] through the
S axis operation menu.
6 Check that the Pallet of Z601 can smoothly
move by manual operation.
7 Check movement conditions of the tray
palette of Z615, Z515, and Z501 according to
a similar procedure on manual operation
mode.
601
0.1[mm]
Tray Pallet
Pin of S-axis
Install Tray Unit (Including machine modification)
SHEET
69/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Tray pickup position setup]
[Necessary jig]
・Tray pickup position teaching jig
・Length reference nozzle jig
・Thickness gauge(0.03[mm])
1 Install the length reference nozzle jig to the
Index 1 of rear side Head.
2 Return the unit to the origin.
3 Press the tray teaching button on the Parts
Supply screen.
4 Press the jig setup button to check the
values of
ΔX, ΔY.
NOTE:
Jig set value
ΔX= -348.5 ,ΔY= -9.5[mm]