MAN00000772_SI-G200BB_SVCPDFA - 第116页

Install Tray Unit (Re-setup after tray unit moved) SEET 4/19 WKGB-10105-02 Installing Tray Unit (Re-setup after tray unit moved) [Docking with mounter main body] [Necessary jig and T ools] ・ S p anner(17[mm]) ・ S p anner…

Install Tray Unit (Re-setup after tray unit moved)

SEET

3/19

WKGB-10105-02

Installing Tray Unit

(Re-setup after tray unit moved)

3 Turn ON the TRAY breaker for the rear

power unit.

Install Tray Unit (Re-setup after tray unit moved)

SEET

4/19

WKGB-10105-02

Installing Tray Unit

(Re-setup after tray unit moved)

[Docking with mounter main body]

[Necessary jig and Tools]

・Spanner(17[mm])

・Spanner(24[mm])

・Spanner(30[mm])

・Hex-Wrench(10[mm])

・Scale(300[mm])

1 Remove front middle cover and rear

upper cover and side upper cover, side

lower cover.

Install Tray Unit (Re-setup after tray unit moved)

SEET

5/19

WKGB-10105-02

Installing Tray Unit

(Re-setup after tray unit moved)

2 Adjust the height of Pin of Tray unit and

long circle hole of mount bracket to

same height.

NOTE:

Adjust four adjuster foot evenly, when change

the height of Tray-unit.

3 Insert the locate pin of tray unit to pin

hole of mount bracket.

4 Adjust height of tray unit.

NOTE:

Adjust height from upper section of the tray

unit electric component cover to bottom of S

axis unit face to 202[mm]～206[mm].

NOTE:

At this time, please confirm the caster of the

tray unit is not touching the floor.

204±2[mm]