MAN00000772_SI-G200BB_SVCPDFA - 第13页
Work Procedure WKGB-10101-01 Installin g System Sof tware SHEET 7/8 4. Click the Y es button on the ASM Soft- ware License screen. 5. Click the Next button o n the User In- formation screen. 6. Click the Next button on t…
Work Procedure
WKGB-10101-01
Installing System Software
SHEET
6/8
7 Install the system software into the rear side
PC.
1. Click the SI-G Slave button on the
Installer screen.
Confirm dialog box is displayed.
2. Click the Yes button on the Confirm
dialog box.
3. Click the Next button on the Welcome
screen.
Work Procedure
WKGB-10101-01
Installing System Software
SHEET
7/8
4. Click the Yes button on the ASM Soft-
ware License screen.
5. Click the Next button on the User In-
formation screen.
6. Click the Next button on the Setup
Type screen.
Work Procedure
WKGB-10101-01
Installing System Software
SHEET
8/8
Installation of the system software is started.
When installation is ended, Information dialog
box appears.
7. Click the OK button on the Informa-
tion dialog box.
8 Re-start the unit.
1. Close the Installer screen.
2. Close the explorer window.
3. Press the power off switch.
Shutting down of the system starts and the power
is automatically shut off.
4. Press the power on switch.
The unit starts, and the system software auto-
matically starts up.
9 Check that the system software normally
operates.
10 Delete the “AutoStarter” file which was
evacuated to the other folder.
Power on switch
Power off switch