MAN00000772_SI-G200BB_SVCPDFA - 第174页
Set-up HLGB-10202-01 H A xis Origin Position Setu p SHEET 3/4 5 Set up H Axis Origin Position. 1. Click the Setup Start butt on on the H Axis Home screen. “Press [ST AR T] to move to inde x 1” is displayed on the message…
Set-up
HLGB-10202-01
H Axis Origin Position Setup
SHEET
2/4
3. Click the H Axis Home button on the
Machine Setup screen.
H Axis Home screen is displayed.
4 Use the XY move screen to move the head
to a position where working is easily
performed.
1. Click the XY button on the H Axis
Home screen.
XY Axis screen is displayed.
2. Click the Jog Move button in the move
mode.
3. Press the cursor key to move the head
to a position where working is easily
performed.
4. Press the Return button after the
head moves to close the XY axis
screen.
Set-up
HLGB-10202-01
H Axis Origin Position Setup
SHEET
3/4
5 Set up H Axis Origin Position.
1. Click the Setup Start button on the H
Axis Home screen.
“Press [START] to move to index 1” is displayed
on the message screen.
2. Press the [START] button on the
operation panel.
The inner shaft of the turret No.1 moves to just
below H axis pusher, then “When [START]
button is pressed, captures H height and moves to
the next index” is displayed on the message
screen.
And, the servo is automatically turned OFF.
3. Lower the H axis roller by hand and
gradually return it to the top end.
After returning the H axis, push up the inner
shaft from lower section by finger and check
that the inner shaft has returned to the
uppermost end.
4. Press the [START] button on the
operation panel.
H axis standby position is automatically
captured, and “When [START] button is pressed,
moves to Index 2” is displayed on the message
screen.
5. Repeat working of the procedure 2.-4.
up to the turret No.8.
Set-up
HLGB-10202-01
H Axis Origin Position Setup
SHEET
4/4
6 Check that numeric value is displayed in the
“H Offset” box on the H axis origin screen,
and click the Save button.
The H axis origin position is saved and H Axis Home
screen closes.