MAN00000772_SI-G200BB_SVCPDFA - 第188页
Set-up HLGB-10206-01 F Ax is Setup SHEET 1/5 F Axis Setup Perform this working on respective F axis on th e front side and rear sid e. [Necessary jigs] • Feed adjusting jig • Part feed height jig • Thickness gauge [Proce…
Set-up
HLGB-10205-01
Fiducial Mark Setup
SHEET
3/3
Jog-move the head part until the locator pin is
displayed on the center of the PCBOARD
DISPLAY screen.
* A section displayed in white on the PCBOARD
DISPLAY screen is locator pin.
7 Click the Save button on the Fiducial Mark
Setup screen.
The present position is saved and the RT Axis Home
screen closes.
Locator Pin
PWB camera
Set-up
HLGB-10206-01
F Axis Setup
SHEET
1/5
F Axis Setup
Perform this working on respective F axis on the front side and rear side.
[Necessary jigs]
• Feed adjusting jig
• Part feed height jig
• Thickness gauge
[Procedure]
1 Set the replacing carrier.
1. Set the replacing carrier on the unit.
2. Click in an order of MANUAL menu
CASS. tab.
3. Click the Up button for the replacing
carrier on the front or rear side.
4. Press the [START] button on the
operation panel.
The cassette table on the replacing carrier is
locked.
2 Set the feed adjusting jig to the No.20
position on the cassette table.
There should be no gap between the feed
adjusting jig and the cassette table.
Feed adjusting jig
Part feed height jig
Thickness gauge
Feed adjusting jig
Set-up
HLGB-10206-01
F Axis Setup
SHEET
2/5
3 Display the F Axis Home screen.
1. Click in an order of M/C SETUP
menuM/C MAINTENANCE
tabCalibration button.
“Head at opposite position will be moved to
noninterference area. Press the [START] button if
you are really OK.” is displayed on the message
screen.
2. Press the [START] button on the
operation panel.
CALIBRATION screen is displayed.
For procedures when selecting head for which
calibration is performed, and when changing
calibration jig, refer to the “How to display
calibration screen (HLGB-10105-01)”.
3. Click the Machine Setup button on the
CALIBRATION screen.
Machine Setup screen is displayed.
4. Click the F Axis Home button.
F Axis Home screen is displayed.
4 Move the feed part onto the feed adjusting
jig.
1. Click the XY button on the F Axis
Home screen.
XY Axis screen is displayed.