MAN00000772_SI-G200BB_SVCPDFA - 第40页
Install Tray Unit (Including machine modification) SHEET 1/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) Install Tray Unit (Including machine modification) [Necessary jig/tool] ・ Magnet S tand ・ …
Setting UPS when exchanging hard disk
WKGB-10103-02
[Power off machine]
1. Press p
ower off button on machine
front side.
2. Turn off the breaker.
Power On Switch
Power Off Switch
Setting UPS when exchanging
hard disk
14/14
Install Tray Unit (Including machine modification)
SHEET
1/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
Install Tray Unit (Including machine modification)
[Necessary jig/tool]
・Magnet Stand
・Dial Gauge(Resolution=0.1[mm] Max>1.2[mm])
・Thickness Gauge
・Tray Pick Up Point Jig
・Reference Jig Nozzle
・Area sensor adjustment Jig
・Feed Adjusting Jig
・Shutter sensor adjustment jig
・Pick Up Point Jig(For Cassette)
・Spanner(17[mm],24[mm],30[mm])
・Hex-Wrench(10 [mm] )
・Scale(300[mm])
・Thickness Gauge(0.3[mm],0.5[mm],1.0[mm])
Install Tray Unit (Including machine modification)
SHEET
2/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
［Checking conveyor width specification］
SI-G200 tray specifications are different from each other in tray pallet supportable dimension depending on
conveyor width.
Check dimension of tray pallet to be used for the unit in advance to change conveyor width specification if
necessary.
Reference:
JEDEC standard tray size
X=322.6[mm], Y=135.9[mm] can be supported by CV width specification
410[mm].
1 Pickup enable area when CV width specification is 410[mm]
2 Pickup enable area when CV width specification is 360[mm]
5.0[mm]
336.0[mm]
341.0[mm]
225[mm]
Nozzle operating range
Placing enable tray size
5.0[mm]
336.0[mm]
341.0[mm]
175.5[mm]
Nozzle operating range
Placing enable tray size
225[mm]