MAN00000772_SI-G200BB_SVCPDFA - 第44页
Install Tray Unit (Including machine modification) SHEET 5/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) [Replacing Y axis urethane stopper (Rear head only)] 1 T urn off power for the unit. 2 Ope…
Install Tray Unit (Including machine modification)
SHEET
4/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Change position of Nozzle sensor]
Execute this work if you have changed the specification of the width to 360[mm].
If the conveyor specification is standard, we don't need to do this work.
1 Remove rear side center cover and shooter.
2 Loosen 2-CP3x6, and change the position of
Nozzle sensor.
3 Set up again nozzle sensor.
For procedure of nozzle sensor adjustment, refer to
the “Nozzle sensor Adjustment [HLGB-10415-01].”
Install Tray Unit (Including machine modification)
SHEET
5/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Replacing Y axis urethane stopper (Rear head only)]
1 Turn off power for the unit.
2 Open the slide door on the rear side, and
move the rear head to the front wherever
possible.
3 Remove the bolts 4-CP4x30, and remove
the existing urethane stopper.
4 Apply small amount of LOCKTITE 242 to
the bolts 4-CP4x10 and install the
urethane stopper for tray specification.
NOTE:
Urethane stopper for replacement is only for
tray specification.
Existing urethane stopper (33[mm])
Urethane stopper for tray specification (11[mm])
Install Tray Unit (Including machine modification)
SHEET
6/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Checking prevention of interference(between F axis motor and
frame/connector and frame)]
1 Move the rear head to the mechanical ends
in -X,+Y directions.
2 Check that the F axis motor does not
interfere with the frame support column.
NOTE:
If interference between the F axis motor and frame
has been checked, grind the frame.
NOTE:
Frames of KG0201 and later, NTG0100 and later,
NY0001 and later are interference prevention
products.
Serial marking location
Unit rear side
25[mm] 23[mm]
60[mm] 173[mm]
Front Side
Front view