MAN00000772_SI-G200BB_SVCPDFA - 第52页
Install Tray Unit (Including machine modification) SHEET 13/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) 3. Loosen the CP4x8 to remove the sealing on the right side. NOTE: The bolt s fixing the …
Install Tray Unit (Including machine modification)
SHEET
12/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
3 Connect the TY-MLOUT on the tray
coupling I/F plate and the PW-3 on the
RN axis motor driver with the servo
communication cable.
NOTE:
Please arrange the following goods additionally, if you execute the modification to SI-G200
that is older than the 866th machine.
・A-1540-885-A TRAY ASSY KIT
1-834-058-11 CABLE, TRAY CONNECT 3
1-835-002-11 CABLE (JEPMC-W6002-04-E)
3-870-447-01 CAP (SC750-150), SILICON
4-708-465-01 CAP, TUBE (KQ2C06-00)
4-716-434-11 TIE, INSULOCK (AB100 BLACK)
4-761-324-31 REJUICER (KQ2R06-08)
7-632-385-50 TUBE, POLYURETHAN (TU0604B)
Please connect the cable that has already been arranged, if you execute the modification to
SI-G200 that is later than the 865th machine.
1. Loosen the 2-CP4x45 to remove the top plate on the
rear side.
2.
Loosen the 6-+T5x6 to remove the packen box.
Install Tray Unit (Including machine modification)
SHEET
13/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
3. Loosen the CP4x8 to remove the sealing on the
right side.
NOTE:
The bolts fixing the side sealing are on the front
and rear.
4. Loosen the CP5x10 to remove the right rear
shoulder cover.
5. Connect the CN6 on the RN axis motor driver from
the TY-MLOUT on the tray coupling I/F plate with
the servo communication cable.
Front
CN6
T
Y
-MLOUT
TY-CTLO
TY-ACOUT
AIR
Install Tray Unit (Including machine modification)
SHEET
14/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
4 Connection of serial DIO connector
(OP2-OP3)
Connect the SDR-OP2, SDR-OP3 on the tray coupling I/F plate.
1. Remove the existing
cable ”SDR-OP2<=======>SDR-OP3.”
REAR
SDR-OP2
SDR-OP3
3
3
Tray coupling I/F panel
TY-CTLOUT