MAN00000772_SI-G200BB_SVCPDFA - 第55页
Install Tray Unit (Including machine modification) SHEET 16/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) 5 Inst all wiring of EX2 I/O cable. NOTE: Please arrange the following goods additionally…
Install Tray Unit (Including machine modification)
SHEET
15/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
2. Connect the TY-CTROUT on the tray coupling I/F
bracket, and the SDR-OP2, SDR-OP3.
3. Fix the shoulder cover with the 2-CP5x10.
4. Fix the side sealing with the 2-CP5x10.
5. Install the packen box with the 6-+T5x6.
6. Install the top plate on the front side with the
2-CP4x45.
7. Install the top plate on the rear side with the
2-CP4x45.
SDR-OP2
SDR-OP3
TY-CTROUT
Install Tray Unit (Including machine modification)
SHEET
16/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
5 Install wiring of EX2 I/O cable.
NOTE:
Please arrange the following goods additionally, if you execute the modification to SI-G200
that is older than the 866th machine.
・A-1540-885-A TRAY ASSY KIT
1-834-058-11 CABLE, TRAY CONNECT 3
1-835-002-11 CABLE (JEPMC-W6002-04-E)
3-870-447-01 CAP (SC750-150), SILICON
4-708-465-01 CAP, TUBE (KQ2C06-00)
4-716-434-11 TIE, INSULOCK (AB100 BLACK)
4-761-324-31 REJUICER (KQ2R06-08)
7-632-385-50 TUBE, POLYURETHAN (TU0604B)
Please connect the cable that has already been arranged, if you execute the modification to
SI-G200 that is later than the 865th machine.
1. Remove the front center cover and left lower front
cover.
2. Remove the rear center cover and left lower rear
cover.
Install Tray Unit (Including machine modification)
SHEET
17/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
3. Connect the EI0-14 of EX2 I/O cable to the CN14
of EX2 I/O board and wire EX2 I/O cable to rear
side of mounter.
4. Connect the TY-CTL3 of the EX2 I/O cable to
TY0-CTR3 of the tray I/F panel.
Front