MAN00000772_SI-G200BB_SVCPDFA - 第58页
Install Tray Unit (Including machine modification) SHEET 19/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) [Removal of under cover] 1 Remove the rear center cover and shooter . 2 Loosen the 4-CP4x…
Install Tray Unit (Including machine modification)
SHEET
18/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
6 Connection of tray coupling cable
1. Loosen the CP6x12 and pull pout the I/O unit 1
and I/O unit 3 to a position where working can be easily
performed.
NOTE:
Do not forcedly pull them out. Otherwise, the cable may
be damaged.
2. Connect the ELR-12 to CN12 on the emergency
I/L Board in the I/O unit 3, and connect SR-5,
SR-16 to CN5, CN16 on the safety relay board in
the I/O unit.
NOTE:
Remove the jumper connector connected
CN12 on E I/L board and connected CN5 on
SR board.
7 Install the tray I/F panel with the
2-CP6X8.
NOTE:
Connect terminal connectors to the TY-MLOUT and
TY-CTLOUT.
I/O 2
I/O 1
I/O 3
TY-CTL1
TY-CTL2
Install Tray Unit (Including machine modification)
SHEET
19/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Removal of under cover]
1 Remove the rear center cover and
shooter.
2 Loosen the 4-CP4x8 to remove the
under cover bracket on the rear side.
3 Loosen the CP4x8 to remove the cover
stay (R) on the rear side.
NOTE:
Use the cover installing stay (L) as it is.
Under cover bracket on rear side
Cover installing stay on the rea
r
side (R)
Cover installing stay (L) on rear side
Install Tray Unit (Including machine modification)
SHEET
20/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Installation of joint block, coupling bracket]
1 Install the base block, joint block (1) and
joint block (2) in this sequence to the
rear side of the unit.
1. Fix the base block to the rear side of the frame
using the CP12x20、CP12x35.
2. Fix the joint block(1) and joint block(2) to base
block using the CP12x20, CP12x35.
NOTE:
Temporarily fix the joint block (1) and joint
block (2).
Rear
Base block
CP12x20
CP12x35
CP8x35
W8
Joint block（１）
Joint block (2)
CP12x16
W12
CP6x14
W6