MAN00000772_SI-G200BB_SVCPDFA - 第652页
Pickup Check Camera Part RPGB-10201-01 Pickup Check Camera Up/Down Cylinder Replacement SHEET 4/7 [Reassembling Procedure] 1 Secure the cylinder cove r with 3-+K3x6. 2 Make sure the protrusi on of the adjuster from the b…
Pickup Check Camera Part
RPGB-10201-01
Pickup Check Camera Up/Down
Cylinder Replacement
SHEET
3/7
9 Loosen 2-CP3x5 to remove the cylinder
sensor holder.
10 Loosen 2-CP4x8 to remove the main
bracket.
11 Loosen 2-CP2x6 to remove the downward
end stopper block.
12 Loosen 3-+K3x6 to remove the cylinder
cover.
Cylinder sensor holder
Main bracket
Stopper block
Cylinder cover
Pickup Check Camera Part
RPGB-10201-01
Pickup Check Camera Up/Down
Cylinder Replacement
SHEET
4/7
[Reassembling Procedure]
1 Secure the cylinder cover with 3-+K3x6.
2 Make sure the protrusion of the adjuster
from the backward end is 4 [mm].
3 Apply small amount of LOCTITE 242 to
2-CP2x6 and attach the stopper block.
Fix the stopper block so that clearance between the
side of the stopper block and the cylinder becomes
1.0mm.
Tightening torque: 54[cNm]
4 Adjust the protrusion of the shock absorber
to 11 [mm].
5 Apply small amount of LOCTITE 242 to
2-CP4x6 and attach the main bracket.
Cylinder cover
4.0 mm
Stopper block
Thickness gauge
(1.0mm)
2-CP2x6
11.0 mm
Main bracket
Main bracket
Pickup Check Camera Part
RPGB-10201-01
Pickup Check Camera Up/Down
Cylinder Replacement
SHEET
5/7
6 Connect the pipe fitting.
7 Apply small amount of LOCTITE 242 to
4-CP3x6 and secure the camera holder.
Apply AFC grease thinly to the pin press-fitted
in the camera holder.
8 Attach the cylinder sensor holder and the
cylinder sensor with 2-CP3x5.
SSB-4 comes top and SSB-2 comes bottom.
9 Attach the pickup check Up/Down unit of
Pick up check camera with 2-CP4x6 from
rear side of the head.
Pipe fitting
Camera holder
Cylinder sensor holder
SSB-4
SSB-2
2-CP4x6