MAN00000772_SI-G200BB_SVCPDFA - 第658页
Pickup Check Camera Part RPGB-10202-01 Pickup Check Light Up/Do wn Cylinder Replacement SHEET 3/7 10 Disconne ct the cylinder sensors from the cylinder . Cylinder sensor
Pickup Check Camera Part
RPGB-10202-01
Pickup Check Light Up/Down
Cylinder Replacement
SHEET
2/7
6 Remove CP2x6 from the rod end.
Use caution not to drop the collar.
7 Remove the cable tie (Insulock) fastening
the light unit, and then remove the light unit
together with the slide block.
8 Loosen 2-CP2.5x22 screw to remove the
cylinder.
9 Disconnect two air tubes from the air
cylinder.
To prevent connected mistake when
re-assemble, please mark to the air tubes before
disconnecting.
CP2x6
Cylinder
Light unit
CP2.5x22
Cylinder
A
ir tube
Pickup Check Camera Part
RPGB-10202-01
Pickup Check Light Up/Down
Cylinder Replacement
SHEET
3/7
10 Disconnect the cylinder sensors from the
cylinder.
Cylinder sensor
Pickup Check Camera Part
RPGB-10202-01
Pickup Check Light Up/Down
Cylinder Replacement
SHEET
4/7
[Attaching the Cylinder]
1 Connect the air tubes and cylinder sensor to
the air cylinder.
2 Fasten the air cylinder temporarily with
2-CP2.5x22 screw.
3 Apply small amount of AFC grease to the
balls of the slide block.
Use caution not to drop the balls.
Air tube
Cylinder sensor
CP2.5x22
Cylinder
Balls