MAN00000772_SI-G200BB_SVCPDFA - 第67页
Install Tray Unit (Including machine modification) SHEET 28/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) 8 Inst all the sensor bracket to the cassette ta bl e . NOTE: T emporarily fix the sensor…
Install Tray Unit (Including machine modification)
SHEET
27/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
7 Install a cassette floating detection
sensor to the sensor bracket.
1. Install the sensor to the bracket with the 2-+K3x8
and plate nut.
NOTE:
Press the sensor against the sensor cable side and
temporarily fix it.
2. Install the bracket for fixing amplifier and sensor
amplifier to the sensor bracket on the right side.
2-CP3X5
Sensor amplifier
Bracket
Plate nut
2-+K3X8 Sensor
Bracket
2-+K3X8
Install Tray Unit (Including machine modification)
SHEET
28/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
8 Install the sensor bracket to the cassette
table.
NOTE:
Temporarily fix the sensor bracket.
NOTE:
Bind the fiber line with INSULOCK.
9 Connect the sensor amplifier and the
connector 375 on the main body.
2-CP4x8
Fiber line binding
2-CP4x8
Cassette cable
Fiber line
Cassette table
Tie mount
Install Tray Unit (Including machine modification)
SHEET
29/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
10 Connect the fiber line to the sensor
amplifier.
NOTE:
Connect the fiber line so that the left side is
floodlighting and the right side is light receiving
toward the rear operation panel.
NOTE:
Bind the fiber line against the mount at the lower
section of the cassette table, and cut the extra fiber
line.
Cassette table
Cassette table
Tie mount
Upper: Floodlight
Lower: Light receiving