MAN00000772_SI-G200BB_SVCPDFA - 第83页

Install Tray Unit (Including machine modification) SHEET 44/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) [Input of tray p art s pickup Y coordinate] 1 Open “c:¥asm¥mcdat a2¥supply_pos.ini” by wo…

Install Tray Unit (Including machine modification)

SHEET

43/73

WKGB-10104-03

Installing Tray Unit

(Including machine modification)

[Setup of software limit (+YR)]

1 Temporarily expand the software limit

only for the rear head.

1. Open

“c:¥asm¥mcdata2¥ac_param.ini” by

word pad and add 100 to

“SOFT_LIMIT_PLUS” for [AC_Y].

2. Overwrite and save

“c:¥asm¥mcdata2¥ac_param.ini.”

2 Power off and Re-boot machine.

3 Perform pickup position teaching for the

rear supply section.

NOTE:

For procedure of pickup position teaching, refer to

“Pickup position setup procedure [HLGB-10312-01].”

4 Move the rear head to the Z101 and

press the XY button for the M/C

SETUP/ORG OFFSET.

5 Assign the indicated Y axis position into

the following equation.

Equation:

Software limit(+YR)

= Y axis position of Z101(R) ＋ 1.2

Example:

Software limit (+YR) = 40.476 + 1.2 = 41.676

6 Open “c:¥asm¥mcdata2¥ac_param.ini”

by word pad and change a value of

“SOFT_LIMIT_PLUS” for [AC_Y].

7 Overwrite and save

“c:¥asm¥mcdata2¥ac_param.ini”, and

re-boot machine.

Install Tray Unit (Including machine modification)

SHEET

44/73

WKGB-10104-03

Installing Tray Unit

(Including machine modification)

[Input of tray parts pickup Y coordinate]

1 Open “c:¥asm¥mcdata2¥supply_pos.ini”

by word pad.

2 Rewrite the pickup Y coordinate value on

the [Cass118] to the same value of the

pickup Y coordinate on the [Cass101].

3 Overwrite and save the file and restart the

mounted machine.

Install Tray Unit (Including machine modification)

SHEET

45/73

WKGB-10104-03

Installing Tray Unit

(Including machine modification)

[Docking with mounter main body]

[Necessary jig and Tools]

・Spanner(17[mm])

・Spanner(24[mm])

・Spanner(30[mm])

・Hex-Wrench(10[mm])

・Scale(300[mm])

1 Remove front middle cover and rear

upper cover and side upper cover, side

lower cover.