MAN00000772_SI-G200BB_SVCPDFA - 第90页
Install Tray Unit (Including machine modification) SHEET 51/73 WKGB-10104-03 Installing Tray Unit (Including machine modification) 11 Adjust and confirm the straight of the tray rack and S axis unit. 1. Move the concave …
Install Tray Unit (Including machine modification)
SHEET
50/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
10 Adjust tray unit position and make the
clearance 10
±0.2[mm] between end of
tray rack and s-axis frame.
NOTE:
At this time, confirm the mount bracket fixation
screw is loose.
NOTE:
Need to confirm the clearance of right side and left
side of tray rack.
NOTE:
At this time, confirm each roller position. If roller
can not open shutter, please change roller position.
Example:
Using Hex-Wrench(10[mm])
Install Tray Unit (Including machine modification)
SHEET
51/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
11 Adjust and confirm the straight of the
tray rack and S axis unit.
1. Move the concave part of the side plate of tray rack to
the same height of S axis rail.
2. Open shutter by the hand, and check straight side plate
of tray rack and pallet guide of S-axis.
3. If it is not straight, do fine adjust position of tray unit.
Base side
Tray unit S axis unit
Install Tray Unit (Including machine modification)
SHEET
52/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
12 Fix the mount bracket to tray unit with
CP12x20.
13 Fix the mount bracket to tray unit with
CP12x20.
14 Fix joint block(1) and block(2) with
CP6x14 and CP12x20.
NOTE:
Fix joint block(1) and joint block(2) after
bumped to tray unit.
Main body
side
Tray unit side