00192801-01 - 第46页
5 Configuration User M anual V 1.15 - Productivity Lift 5.9 Conveyor on LF 1 Software version V 40. 1 1 Edition 01/2001 38 &RQY H \R URQ /) Depending on the revis ion level of the Producti vity Lift, t he T …
User Manual V 1.15 - Productivity Lift 5 Configuration
Software version V 40.11 Edition 01/2001 5.7 Code number
37
&RGHQXPEHU
127(
All the settings after this menu affect the basic parameters of the device and are generally only
defined during initial installation. For this reason, access is protected by code number entry. The
code number requested in the configuration may only be known to one authorised person, and
may not be passed on to unauthorised persons.
8QGHUQHDWKEHOW
If the lift is installed as the end module in the line, it no longer has an underfloor conveyor. This
function must then be disabled in this menu.
Code number
0000
Underneath belt
Turned off
5 Configuration User Manual V 1.15 - Productivity Lift
5.9 Conveyor on LF 1 Software version V 40.11 Edition 01/2001
38
&RQYH\RURQ/)
Depending on the revision level of the Productivity Lift, the Top Conveyor, has one or two convey-
ors. Select the appropriate setting "1" or "2". "1" for one conveyor. "2" for two conveyors.
$/7SURWHFWLRQ
With this function (adjustment "switched on") the input possibilities in the configuration menu ("▲"
and "ALT" - cursor) and in the adjustment mode ("ALT" - cursor) are locked. Input is only possible
when the interlock is used.
Conveyor on LF 1
1
ALT protection
Turned on
User Manual V 1.15 - Productivity Lift 5 Configuration
Software version V 40.11 Edition 01/2001 5.11 Width adjusting 1
39
:LGWKDGMXVWLQJ
This menu can be used to set the mode for operation of the automatic tracking facility (option) for
width adjustment for the lift belt top.
The following are possible:
turned off : The device has no electrical width adjustment (standard).
manual : The device has an electrical width adjustment facility but no automatic track-
ing facility. The width must be adjusted in the manual-operating mode using
the corresponding function.
automatic : The device has an automatic tracking facility. This setting is then used to
constantly check the transport width of the device, which prescribes the
width.
only at start : The device has an automatic tracking facility. This setting is then used to
check the transport width of the device, which prescribes the width, but only
at the start of the lift.
Width adjusting 1
manual