YAMAHA 报警资料 - 第154页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 154 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 153 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12111 Pause. 停止
Ea12112 Executing. 正在行．．．
Ea12113 Failed to find out machine. 没有找到机器。
Ea12114 String is empty. 字符串是空的。
Ea12115 String is too long. 字符串。
Ea12116 Out of range.
%s
数据在范外。
%s
Ea12117 Buffer is full. 冲器已。
Ea12118 Buffer is empty. 冲器是空的。
Ea12119 Already initialized. 已初始化。
Ea12120 Not initialized. 没有初始化。
Ea12121 Hardware trouble. 生了硬件方面的故障。
Ea12122 Already used. 已使用。
Ea12123 Sending. 正在送信．．．
Ea12124 Receiving. 正在接收．．．
Ea12125 Executing. 正在行．．．
Ea12126 Send timeout. 生了送信超。
Ea12127 Receive timeout. 生了接收超。
Ea12128 Not received. 没有接收。
Ea12129 Failed to receive. 接收已失。
Ea12130 Failed to transmit. 送信已失。
Ea12131 Failed to execute this command. 指令的行已失。
Ea12132 The transmitance condition is busy. 送信占。
Ea12133 Failed to create a new file. 文件的建失了。
Ea12134 Failed to open the file. 文件的打已失。
Ea12135 Failed to close the file. 文件的已失。
Ea12136 Failed to get number of records in the file. 文件的数的取得已失。
Ea12137 Failed to load the file. 文件的入已失。
Ea12138 Failed to save the file. 文件的写入已失。
Ea12139 Failed to reserve the file. 文件的已失。
Ea12140 Failed to free the file. 文件的放已失。
Ea12141 Failed to seek the file. 文件的找已失。
Ea12142 Failed to append the record to the file. 的添加已失。
Ea12143 Failed to delete the record from the file. 的除已失。
Ea12144 Failed to get number of tables in the file. 文件的表数的取得已失。
Ea12145 File service not installed. 文件服没有安装。
Ea12146 EOF 已到达 EOF。
Ea12147 File is not found. 没有文件。
Ea12148 File is not found. 没有文件。
Ea12149 Too many opened files. 打的文件多。
Ea12150 The file can not be accessed. 禁止文件。
Ea12151 The file is already opened. 文件已打。
Ea12152 The file is not opened. 文件没有打。
Ea12153 The file is already closed. 文件已。
Ea12154 The file already exists. 文件已存在。
Ea12155 The file is already reserved. 文件已被其他程所定。
Ea12156 The file is not reserved. 文件没有定。
Ea12157 Could not find the file. 因不是定的程，所以不能放此文件。
Ea12158 Master file is not found. 没有主文件。
Ea12159 The record is not found. 没有找到。
Ea12160 The record already exists. 已存在。
Ea12161 The table is not found 未能找到表。
Ea12162 The table already exists. 表已存在。
Ea12163 Invalid file name. 无效的文件名。
Ea12164 The file is read-only. 文件只文件，不能写入。
Ea12165 Failed to open Memory-mapped-file. 未能打内存映像文件。
Ea12166 Memory-mapped-file is already opened. 内存映像文件已打。
Ea12167 Memory-mapped-file is not opened. 未打内存映像文件。
Ea12168 Memory-mapped-file error. 内存映像文件生了故障。
Ea12169 Failed to execute this command. 指令的行已失。
Ea12170 The command is executing. 正在行指令．．．
Ea12171 Could not execute the command. 不能行指令。
Ea12172 Failed to create a window. 窗口的生成已失。
Ea12173 Failure to Read and Init I/O-list Data
No. %d
不存在必要的 IOLIST 数据。
No. %d
Ea12174 Replace? 置?
Ea12175 String is not found. 没有找到字符串。
Ea12176 Edit Error
Sort by ""No."" for editing.
在 No.以外行排序不能。
Ea12177 Data is not found on the clipboard. 剪板上没有数据。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 154 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12178 Failed to insert lines because the bottom data was lost. 如果插入行，数据将会消失，所以未能行。
Ea12179 No Board Data is loaded. 没有入基板程序。
Ea12180 Differ from board data.
Could not load abort information.
因与当前正在入的基板名称不一致，
所以不能入中断信息。
Ea12181 Could not replace string. 字符串的置已失。
Ea12182 Differ from Mount Point.
Could not load abort information.
因与当前入的基板程序的装数不一致，
所以不能入中断信息。
Ea12183 Differ from Offset Point.
Could not load abort information.
因与当前入的基板名数据的拼位移数不一致，
所以不能加中断信息。
Ea12184 HALFWAY CONTINUE
Stopped Halfway Information is loaded.
If you continue the process,
the loaded information will be lost.
[OK] Continue
[Cancel] Abort
中途始运行
因中途始运行指令，正在入中断信息。
如行理，中断信息将失，可以行?
行，按[OK]。
中断理，按[取消]。
Ea12185 Failed to create backup files. 份文件的生成已失。
Ea12186 Failed to restore backup files. 份文件的原已失。
Ea12187 Failed to execute Return-To-Origin. 返回原点已失。
Ea12188 HALFWAY CONTINUE
Halfway Continue is executed.
[OK] Continue Auto Running
[Cancel] Abort
中途始运行
从中途始运行。
如使用入的中断信息行生，按[OK]按。
中断理，按[取消]按。
Ea12189 PARTS DUMP AND RESET
Some heads may still have parts.
Dump parts during reset?
[OK] Reset and dump parts in dump box
[Cancel] Abort
* Attention that all parts are dumped at dump pos
regardless of dump way.
* Parts can be discarded and reset in the position of
the head present by SHIFT+[OK].
(Be careful of the position from which parts fall.)
元件的弃和位
可能吸附着元件。
是否将元件弃，然后行位?
[是] 完成弃作后，行位。
[取消] 不位。
* 注意，无如何置弃方法，全部的元件都将
弃在弃位置。
* 用 SHIFT+[OK]，可将元件弃在当前 Head 位置上，
然后行位。(注意元件落下的位置。)
Ea12190 Conveyor width is not ready for production.
When you want to change width,
please check the following point and press [OK] button.
1. Ensure the boards are not on the conveyor.
2. Ensure the push up pins are not around the position
interfered with conveyor.
Please press the [CANCEL] button, when you want to cancel.
改送度?
改，在确下列两后按[OK]。
1.送上没有基板。
2.与送互不干。
中止，按[取消]。
Ea12191 Failed to copy the file. 文件的制已失。
Ea12192 Failed to save the file.
The number of VIOS board data will exceed the maximum.
The maximum number is 510.
ACTION METHOD
Please move unnecessary board data to other places.
无法再保存 VIOS 基板程序
最多只能保存 510 个。
解决方法:
将不要的基板程序移到其它位置。
Ea12193 Failed to delete the file. 文件除已失。
Ea12194 Some heads may still have parts.
Do you wish to dump these parts?
[OK] Dump
[Cancel] Abort
可能吸附着元件。
是否弃元件?
[OK] 弃
[CANCEL] 中断
Ea12195 Position was already taught.
Retry teaching?
[OK] Clear previous data and retry teaching
[CANCEL] Keep previous data and abort
存在已示教的数据
是否弃数据重新示教?
[OK] 弃数据并重新示教。
[取消] 不重新示教。
Ea12196 Not possible to write in this folder.
Write in directory 'No1' to 'No10'.
不能保存在文件中。
保存在[No.1]～[No.10]中。
Ea12197 Do you want to format the floppy disk? 是否将格式化?
Ea12198 Do you want to move the FES feederplate to the down position?
Execute, if the machine will be shut down for more than one day.
[OK] Execute
[Cancel] Abort
是否可以将一次性料送料器架移到下降端?
在停止向机器供气 1 日以上的侯行。
[OK] 行
[取消] 中止行
Ea12199 The function Vision Cursor Teach is finished successfully.
Please Run again.
已正常完成了光示教。
重新启运行。
Ea12200 (Generic Message2)" (通用信息 2)"
Ea12201 Copying........ 正在制．．．
Ea12202 Copy from %s to %s. 从%s 制到 %s 。
Ea12203 Copy to 已制到
Ea12204 Save the pattern 已登。
Ea12205 FEEDER SPEC INFORMATION ERROR
Invalid Feeder Spec Information !
Check the feeder spec information.
送料器架格信息
送料器架格信息不正确。
更正。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 155 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12206 SET FROM DATABASE ALL
Do you wish to execute the 'SET FROM DATABASE ALL'?
数据全置
%s 行数据全置。
确要行?
Ea12207 %s DATABASE is saving to backup.
Select saving folder.
将%s 数据保存到媒体中...
Ea12208 %s DATABASE was saved. 已保存数据%s。
Ea12209 Failed to save %s DATABASE. 未能保存数据%s。
Ea12210 %s DATABASE is restoring from backup.
Select saved folder.
从媒体中原数据%s。
Ea12211 %s DATABASE was restored. 已原数据%s。
Ea12212 Failed to restore %s DATABASE. 未能原数据%s。
Ea12213 Vertical format unit 送
Ea12214 SUCCESS OF MEASUREMENT RESULT SAVE
Save to %s.
定果保存成功，已保存到%s。
Ea12215 COULD NOT SAVE. 未能保存。
Ea12216 NoNzl 未置。
Ea12217 DELETE BOARD DATA
Board [%s] is being edited now.
Do you want to remove it?
除基板程序
基板[%s]，正在中。
确要除?
Ea12218 Failed to remove this file because it is used now. 因文件正在使用，所以不能除！
Ea12219 The MMF of log for measuring cycle time has been opened! 周期定日志 MMF 已打！
Ea12220 MEASURING CYCLE TIME
Measuring cycle time....
周期定
正在行周期定．．．
Ea12221 ESTIMATING CYCLE TIME
Estimating cycle time....
周期推
正在行周期推．．．
Ea12222 RESET HISTORY DATA
Do you want to Reset History data?
履数据初始化
初始化履数据，可以?
Ea12223 CLEAR HISTORY DATA
Do you want to Clear History data?
履数据的清除
清除履数据。
您确定?
Ea12224 INITILIZE FAMF DATA
Do you want to Clear FAMF Measure data?
FAMF 数据初始化
将 FAMF 的定数据，合果等行初始化。可以?
Ea12225 Unlock pin... 正在行．．．
Ea12226 Lock pin... 正在行上．．．
Ea12227 ATS1 ATS1
Ea12228 ATS2 ATS2
Ea12229 CLEAR TRAY COUNTER
Do you want to clear Tray counter for all parts?
清除托数
清除所有元件的托数。
您确定?
Ea12230 CLEAR TRAY COUNTER
Do you want to clear Tray counter for the selected part?
清除托数
清除所 1 个元件的托数。
您确定?
Ea12231 TRAY PART NOT FOUND
The tray part in the loaded data doesn't exist.
托元件不存在
装数据所参照的托元件不存在。
Ea12232 RS-232-C ready RS-232-C 通信等待
Ea12233 RS-232-C busy RS-232-C 通信中．．．
Ea12234 RS-232-C receiving RS-232-C 接收中．．．
Ea12235 RS-232-C sending RS-232-C 送信中．．．
Ea12236 Service key OFF OFF
Ea12237 Service key ON ON
Ea12238 Service key front ON 前 ON
Ea12239 Service key rear ON 后 ON
Ea12240 Service key front & rear ON 两 ON
Ea12241 MSP disconnected MSP 未接
Ea12242 MSP connected MSP 接
Ea12243 Do you want to save the History data? 保存履数据
保存履数据。
确保存?
Ea12244 History data will be saved now. 正在保存履数据．．．
Ea12245 History data is saved. 已保存履数据。
Ea12246 Failed to save the MIS data. 履数据的保存已失。
Ea12247 No History data item is selected! 没有履数据！
Ea12248 History data is cleared and/or resetted. 已 清除/初始化 履数据。
Ea12249 SET FROM DATABASE ALL
A set from database all for all the parts and marks
after board reading is done successfully.
数据全置
基板入后，行(元件·)数据的全置。
Ea12250 A name is changed. 正在更改名称．．．
Ea12251 The system sometimes stops moving normally when
data in this database number is changed.
%1
如更改数据号的数据，
系可能不能正常运行。
%1
Ea12252 Reading from %s ... 正在入%s．．．