YAMAHA 报警资料 - 第169页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 169 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 168 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
ID information is on
=== %s ===
exists.
Is ID information eliminated?
When it is chosen, ID information is deleted.
When it is chosen, please put a board on there.
的 QR 信息存在，但没能出基板。
除 QR 信息?
是... 除 QR 信息，运行。
否... 不除 QR 信息，运行。
Ea12599 Board condition un-adjustment.
Please remove the board of
=== %s ===
and re-supply from upstream conveyer.
基板状不一致
=== %s ===
中存在基板，但没有有效的 QR 信息。
取出基板。
基板投入方法：
1.重新投入到上流有 QR 器的出口位置上(冲送装置)。
2.按正确在出位置投入基板。
Ea12600 OVERWRITE QR INFORMATION?
QR information exists
=== %s ===
in the moving destination.
May I overwrite?
QR 信息覆盖保存确
移目的地=== %s ===
中存在 QR 信息。
覆盖保存?
Ea12601 DELETE QR INFORMATION?
QR information is deleted.
After deletion cannot be revived.
Is it all right?
QR 信息除确
除 QR 信息。
除后将无法恢原状，确除?
Ea12603 The pallet of tray changer exists in wafer stage.
Please reset a machine.
料架存在
料架已抽出。
位后，重新基板。
Ea12604 Operation to change status "Parts Not Ready". 作者操作：已行元件无存理。
Ea12605 Operation to change status "Parts Ready". 作者操作：已行元件无存返。
Ea12606 [Not retry] is selected by the confirmation after the emergency stops. 在急停机后的确中[不重新行]
Ea12607 [Retry] is selected by the confirmation after the emergency stops. 在急停机后的确中[重新行]
Ea12609 Schedule Task is processing.
Checking VACUUM LEVEL......
正在行度程。
正在真空......
Ea12610 Schedule Task is processing.
Checking NOZZLE CHECK......
正在行度程。
正在吸嘴状......
Ea12611 Schedule Task is processing.
CLEANING......
正在行度程。
正在行清理......
Ea12612 Schedule Task is processing.
Requesting SIZURI INTERVAL OVER......
正在行度程。
正在要求停机印刷......
Ea12613 Schedule Task is processing.
WASHING NOZZLE......
正在行度程。
正在自清吸嘴......
Ea12614 Schedule Task is processing.
Checking LIGHT LEVEL......
正在行度程。
正在自照明度......
Ea12615 Schedule Task is processing.
Checking SHAFT CLEANING BLOW......
正在行度程。
正在行吸嘴排气......
Ea12616 Schedule Task is processing.
Informing of WASHING NOZZLE......
正在行度程。
正在通知清吸嘴......
Ea12617 The board data of the name already exists.
The content of the board data is lost when continuing.
Do you continue?
名称的基板程序已存在。
行，基板程序的内容将消失。
行?
Ea12618 There is a difference in Offset information saving ahead.
Please confirm whether it is wrong saving ahead.
Is it forced to overwrite save?
与保存位置的位移信息不相同。
确保存位置的路径是否正确。
制行覆盖保存?
Ea12619 WARNING: HALFWAY CONTININUE HASN'T BEEN SETUP
It was canceled in the halfway continue
Or because there is no check in effective Mounted,
a halfway continue is executed.
[Yes] Execute
[No] Not Execute
警告: 未置从中途始运行。
因已取消中途始运行，或没有有效的装
束志，所以不能从中途始运行。
[是] 始自运行。
[否] 不施自运行。
Ea12620 WARNING: HALFWAY CONTINUE
Because Board Data has been changed, HALFWAY CONTINUE is not done.
Do you want to continue?
[Yes] Execute this Board Data
[No] Not Execute
警告: 从中途始运行
因基板程序已更改，所以不能行
从中途始运行。理?
[是] 用当前的基板程序始自运行。
[否] 不施自运行。
Ea12621 Board data is modified.
Because Board data is modified,
Halfway continue information cannot be execute.
Re-load Board data to continue.
Is Auto Running started from the beginning
without doing Halfway Continue?
[Yes] :AutoRun Execute
[No] :Not Execute
正在更改基板程序
因基板程序已更改，若要从中途始运行，
必重新入基板程序。
取消从中途始运行，直接从始运行?
[是] :始自运行。
[否] :不施自运行。
Ea12622 Halfway Continue
The interrupted data exists.
中途始运行
存在中断了的数据。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 169 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Is Halfway Contine done?
[Yes] :Halfway Continue is done.
[No] :Halfway Continue is not done, and AutoRun is begun.
从中途始运行?
[是] :从中途始运行。
[否] :不从中途始运行，而是始自运行。
Ea12624 Board data is modified.
- Block offset point of the board data is different
from the last production.
- Halfway Continue cannot be done.
Is AutoRun begun from the mount of the first point?
[Yes] :AutoRun Execute
[No] :Not Execute
正在更改基板程序
- 基板程序的装数与前次生不同。
- 无法行从中途始运行。
是否从始运行?
[是] :始自运行
[否] :不始自运行
Ea12625 WARNING: HALFWAY CONTINUE is Canceled
Because Halfway Continue was canceled,
Halfway Continue is not executed.
警告: 取消了从中途始运行
因取消了从中途始运行，
所以不从中途始运行。
Ea12626 WARING:Halfway Continue was generated. Please Check Machine.
Halfway Continue was by an online command.Auto Running is not begun.
Please restart operations by the machine.
警告 : 行了从中途始运行。确机器。
因在指令而行了从中途始运行。无法始自运行。
从机器重新始运行。
Ea12627 Other processes are using Board file data.
Please perform processing again.
其它程正在使用基板程序。
再次行理。
Ea12628 Other processes are using file table.
Please perform processing again.
其它程正在使用文件表。
再次行理。
Ea12629 Access of the file for file table exclusion went wrong. 文件表排他文件的操作已失。
Ea12630 Other processes are using the file for file table exclusion.
Please perform processing again.
其它程正在使用文件表排他文件。
再次行理。
Ea12631 Restore of the file for file table exclusion went wrong. 文件表排他文件的原失了。
Ea12632 WAFER MAP INFORMATION CLEAR
Do you want to clear selected wafer map information?
Really?
晶片信息清除
所晶片信息将被清除。
确行?
Ea12633 WAFER MAP INFORMATION ALL CLEAR
Do you want to clear all wafer map information?
Really?
全部晶片信息清除
全部晶片信息将被清除。
确行?
Ea12634 Board condition un-adjustment.
A board is undetectable although
ID information is on
=== %1 ===
exists.
Is delete a ID information?
When '%2' is chosen, please put a Board on %1.
基板状不一致
=== %1 ===
的 ID 信息然存在，但没有出基板。
除 ID ?
当[%2]，将基板放在%1 。
Ea12635 Board condition un-adjustment.
Please remove the board of
=== %1 ===
and re-supply from upstream conveyer.
基板状不一致
=== %1 ===
上然存在基板，但不存在有效的 ID 信息。
取出基板.
Ea12636 OVERWRITE ID INFORMATION?
ID information exists
=== %s ===
in the moving destination.
Do you want to overwrite?
ID 信息覆盖保存确
移目的地=== %s ===
上存在 ID 信息。
覆盖保存它?
Ea12637 DELETE ID INFORMATION?
ID information is deleted.
After deletion cannot be revived.
Is it all right?
ID 信息除确
除 ID 信息。
除后将无法原，确行?
Ea12638 The moving camera is confirming... 正在确移相机位置偏移...
Ea12639 PARTS DUMP AND RESET
Some heads may still have parts.Dump parts during reset?
[OK] Reset and dump parts in dump box
[Cancel] Abort
* Attention that all parts are dumped at dump pos
regardless of dump way.
* Parts can be discarded and reset in the position of
the head present by SHIFT+[OK].
(Be careful of the position from which parts fall.)
* Mount ends on the way.When Board exists in Main Stopper
HalfwayContinue is executed by restarting an autorun.
元件的弃和位
可能正吸附着元件。
弃元件并行位?
[OK] 弃后行位
[取消] 不行位
* 注意，无如何置元件的弃方法，全部元件都将
弃在弃位置。
* 用 SHIFT+[OK]，可将元件弃在当前 Head 位置上，
然后行位。(注意元件落下的位置。)
* 装将在中途束。基板在装位置，再次
启自运行，将从中途始行装。
Ea12640 Reset will be executed.
Are you sure?
* Dispense ends on the way.When Board exists in Main Stopper
HalfwayContinue is executed by restarting an autorun.
行位?
* 涂胶将在中途束。基板在装位置，再次启
自运行，将从中途始运行。
Ea12641 Pitch Distribution
There are some data except No.1 Block.
距展
存在 No.1 之外的位移数据。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 170 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Do you want to execute Pitch Distribution after the end of data? 在最后拼之后添加展?
Ea12642 Pitch Distribution
Data already exist are overwritten.
Do you want to remove these existing data
and execute Pitch Distribution newly?
距展
覆盖保存已存在数据的域。
是否将此次果以外的数据置无效?
Ea12643 Executing Set from database all... 正在行数据的全置...
Ea12645 CHECK NOZZLES
Do you want to execute for all nozzles?
[YES] Execute for all auto changing nozzles.
[NO] Execute for nozzles only on the head.
[CANCEL] Abort.
吸嘴状确
将行吸嘴状确。
是否全部吸嘴行?
[是] 可行自吸嘴交的全部吸嘴行。
[否] 只当前 Head 上的吸嘴行。
[取消] 取消行，返回到原来的画面。
Ea12646 CLEAR ALL HISTORY DATA
Current password level is set to reset Hour Meter.
Do you want to clear History data not only User area
but also Maintanance and Total area ?
履数据全部域的清除
密置表初始化。
清除包括用域、、全累域的全部履数据。
确行?
Ea12647 Failed to create the folder.
Folder names is wrong, or same name exists.
文件的生成已失。
可能是无法生成的文件名或存在同名文件。
Ea12648 Do you want to delete (%s) folder?
All files in the folder are deleted.
除文件(%s)?
文件中的内容将全部被除。
Ea12649 Failed to delete the folder.
Please check whether a folder is read-only.
文件的除失了。
确文件是否禁止写入。
Ea12650 Failed to rename the folder.
The name which cannot be changed,
or a same name exists.
文件的重命名失了。
存在同名文件或名称无法更改的名称。
Ea12651 Do you want to eject media (%s) ? 取出媒体(%s)?
Ea12652 Failed to eject the media.
Try ejecting the media again later.
因正在使用媒体，所以无法取出。
稍后再取。
Ea12653 Media that can not be taken out or folder have been selected.
Please be sure to choose media.
所的文件或不可取出的媒体。
可取出的媒体。
Ea12654 It failed in deletion of a tree view.
It failed in deletion of a tree view.
状的清除失了。
状的清除失了。
Ea12655 Media can be safely ejected. 媒体可以安全取出了。
Ea12656 Please select a folder. 文件。
Ea12657 CONFIRMATION OF CLEANING BLOW
Do you want to execute shaft cleaning blow ?
[OK] Execute for current installed nozzle.
[CANCEL] Abort cleaning blow.
行吸嘴吸嘴排气的确
吸嘴吸嘴行排气清?
[OK] 只当前 Head 上安装的吸嘴行排气清。
[CANCEL] 取消行，返回到原画面。
Ea12658 VERIFICATION OF MANUAL EXCHANGE NOZZLES
If the head has the correct nozzle, turn the check box to ON.
The manual exchange nozzle which check box is OFF does not
execute shaft cleaning blow.
与手更的吸嘴行物照
中安装了正确吸嘴的 Head 号的框。
没有中的手更的吸嘴，不行排气清。
Ea12659 RECONFIRMATION OF CLEANING BLOW
The blow executing heads include manual exchange nozzles.
Please reconfirm whether each head has the nozzle which
was directed on the check table.
If the head has incorrect nozzle then the shaft cleaning blow
cannot execute correctly.
Do you reconfirm ?
[YES] Executes.
[NO] Return to check table monitor for reconfirmation.
[CANCEL] Abort cleaning blow.
行吸嘴吸嘴排气的最确
吸嘴吸嘴排气清的象中包含手更的吸嘴。
再次确指定的吸嘴是否确已安装在 Head 上了。
如果有指定外的吸嘴安装在 Head 上，排气清将不能正常行。
已再次确了?
[YES] 行。
[NO] 返回前一画面，再次确吸嘴。
[CANCEL] 取消行，返回原画面。
Ea12660 RECONFIRMATION OF CLEANING BLOW
Please check around the blow station and nozzle.
Do you want to execute shaft cleaning blow ?
[OK] Executes.
[CANCEL] Abort cleaning blow.
行吸嘴吸嘴排气的最确
确吸嘴以及排气装置的周无异物存在。
吸嘴吸嘴行排气清?
[OK] 行。
[CANCEL] 取消行，返回原画面。
Ea12661 DATA CHECK ERROR
A setup repeated in the feeder set position.
Two feeder set numbers are the same
in the following position.
Please check part information.
Part number1 :
Part number2 :
Feeder set position :
程序: 送料器安装位置重
下列位置的送料器安装号相同。
确元件信息。
元件 1 :
元件 2 :
送料器安装号 : 号
Ea12662 Media do not exist.
Please check a connection state and try again.
媒体不存在。
确接状，并重新行。
Ea12663 Opened motion measure log function. 启了机器作日志功能。
Ea12664 HOUR METER UPDATE ERROR
Input Time is smaller than the Hour Meter.
Hour Mete is not updated.
器更新
入的合运比当前所置的少。
不能更新器。
Ea12665 More than one Print Setting is copied. 制了数个印刷条件。