YAMAHA 报警资料 - 第189页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 189 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 188 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14686 Cart Set num 料󲰻内的安装号󱓖
Ea14687 locate 所在位置
Ea14688 Use 使用状
Ea14689 Unit log -Feeder ID -Feeder Counter
The count the feeder driven is displayed.
履 2 送料器 ID 送料次数
󰌓示󲢺送料器的󳝆次数。
Ea14690 Unit log -Feeder ID -Pick ErrorCounter
The count of "Pick Error" for the parts which is installed to the feeder is displayed.
履 2 送料器 ID 吸料出󳇮次数
󰌓示󲢺送料器上的元件所生的吸料󳇮󲣄次数。
Ea14691 Unit log -Feeder ID -Pick Error Par
The ratio of "Pick Error" for the parts which is installed to the feeder is displayed.
This value is calculated by "Pick Error Counter" / "Feeder Counter".
履 2 送料器 ID 吸料出󳇮率
󰌓示󲢺送料器上的元件所生的吸料󳇮󲣄次数与送料次数的比率。
Ea14692 Unit log -Feeder ID -Vision ErrorCounter
The count of "Vision Error" for the parts which is installed to the feeder is displayed.
履 2 送料器 ID 元件󲢛出󳇮次数
󰌓示󲢺送料器上的元件所生的󲢛󳇮󲣄次数。
Ea14693 Unit log -Feeder ID -Vision ErrorPar
The ratio of "Vision Error" for the parts which is installed to the feeder is displayed.
This value is calculated by "Vision Error Counter" / "Feeder Counter".
履 2 送料器 ID 元件󲢛出󳇮率
󰌓示󲢺送料器上的元件󲢛出󳇮次数与送料次数的比率。
Ea14694 Unit log -Feeder ID -No PartsError Counter
The count of "No Parts Error" for the parts
which is installed to the feeder is displayed.
履 2 送料器 ID 无元件出󳇮次数
󰌓示󲢺送料器上的元件所生的无元件󳇮󲣄次数。
Ea14695 Unit log -Feeder ID -No PartsError Par
The ratio of "No Parts Error" for the parts which is installed to the feeder is
displayed.
This value is calculated by "No Parts Error Counter" / "Feeder Counter".
履 2 送料器 ID 吸嘴出󳇮次数
󰌓示󲢺送料器上的元件所生的无元件󳇮󲣄次数与送料次数的比率。
Ea14696 Unit log -Feeder ID -Nozzle ErrorCounter
The count of "Nozzle Error" for the parts which is installed to the feeder is
displayed.
履 2 送料器 ID 吸嘴出󳇮次数
󰌓示󲢺送料器上的元件所生的吸嘴󳇮󲣄次数。
Ea14697 Unit log -Feeder ID -Nozzle ErrorPar
The ratio of "Nozzle Error" for the parts which is installed to the feeder is displayed.
This value is calculated by "Nozzle Error Counter" / "Feeder Counter".
履 2 送料器 ID 吸嘴出󳇮率
󰌓示󲢺送料器上的元件所生的吸嘴󳇮󲣄次数与送料次数的比率。
Ea14698 Unit log -Feeder ID -Date
The date when each feeder began driving is displayed.
履 2 送料器 ID 󲡶󰨠始󰋋󳋉
󰌓示󲡶󰨠󳝆送料器的始󰋋󳋉。
Ea14699 Unit log -Feeder ID -Warning
The state of "Maintenance Warning" for the feeder is displayed.
履 2 送料器 ID 点󰖕警告状
󰌓示送料器的点󰖕警告状。
Ea14700 Unit log -Nozzle ID -Nozzle ID
ID(Code Name for Identification) set for the nozzle is displayed.
履 2 吸嘴 ID 吸嘴 ID
󰌓示吸嘴的 ID。
Ea14701 Unit log -Nozzle ID -Nozzle Type
"Nozzle Type Name" is displayed,
which is used for specify a use of the nozzle.
履 2 吸嘴 ID 吸嘴󱥐型
󰌓示吸嘴󱥐型名。
用于辨吸嘴的󱚢󱥐。
Ea14702 Unit log -Nozzle ID -Table No.
"Mount Table Number" is displayed, which equipped the nozzle.
履 2 吸嘴 ID 工作台号󱓖
󰌓示安装󲢺吸嘴的工作台号󱓖。
Ea14704 Unit log -Nozzle ID -Nozzle Station No.
"Nozzle Station Number" is displayed,
which is the location number on the nozzle station for the nozzle.
履 2 吸嘴 ID 吸嘴交󰀷站号󱓖
󰌓示吸嘴交󰀷站中存放󲢺吸嘴的位置号󱓖。
Ea14705 Unit log -Nozzle ID -Head No.
"Head Number" is displayed, which can equip the nozzle.
履 2 吸嘴 ID Head 号󱓖
󰌓示安装󲢺吸嘴的 Head 号󱓖
Ea14706 Unit log -Nozzle ID -Head Type
"Head Type" is displayed, which means the type of method for exchanging nozzle.
Fixed : Cannot exchange nozzles
Manual : Can exchange nozzles with manual operation.
ANC : Can exchange nozzles from the nozzle station by the automatic operation.
FNC : Can exchange nozzles from the flying nozzle by the automatic operation.
履 2 吸嘴 ID Head 󱚢󱥐
󰌓示安装󲢺吸嘴的 Head 󱚢󱥐。
固定 : 不能󲲰行吸嘴交󰀷。
手 : 可以手交󰀷吸嘴。
ANC : 可以自在吸嘴交󰀷站交󰀷吸嘴。
FNC : 可以自󲲰行󳖳行式交󰀷吸嘴。
Ea14707 Locate 所在位置
Ea14708 Use 使用状
Ea14709 Blow Level 真空󱭼
Ea14710 Unit log -Nozzle ID -Pick UpCounter
The count the nozzle picked is displayed.
履 2 吸嘴 ID 吸料次数
󰌓示吸嘴󲲰行吸料作的次数。
Ea14711 Unit log -Nozzle ID -Pick ErrorCounter
The count of "Pick Error" for the parts which is installed to the nozzle is displayed.
履 2 吸嘴 ID 吸料出󳇮次数
󰌓示󲢺吸嘴吸附元件󰋋所生的吸附󳇮󲣄次数。
Ea14712 Unit log -Nozzle ID -Pick Error Par
The ratio of "Pick Error" for the parts which is installed to the nozzle is displayed.
This value is calculated by "Pick Error Counter" / "Pick Up Counter".
履 2 吸嘴 ID 吸料出󳇮率
󰌓示󲢺吸嘴吸附元件󰋋所生的吸附󳇮󲣄次数与送料次数的比率。
Ea14713 Unit log -Nozzle ID -Vision ErrorCounter
The count of "Vision Error" for the parts which is installed to the nozzle is displayed.
履 2 吸嘴 ID 元件󲢛出󳇮次数
󰌓示󲢺吸嘴吸附元件󰋋所生的󲢛󳇮󲣄次数。
Ea14714 Unit log -Nozzle ID -Vision ErrorPar
The ratio of "Vision Error" for the parts which is installed to the nozzle is displayed.
This value is calculated by "Vision Error Counter" / "Pick Up Counter".
履 2 吸嘴 ID 元件󲢛出󳇮率
󰌓示󲢺吸嘴吸附元件󰋋所生的󲢛󳇮󲣄次数与送料次数的比率。
Ea14715 Unit log -Nozzle ID -No PartsError Counter
The count of "No Parts Error" for the parts
which is installed to the nozzle is displayed.
履 2 吸嘴 ID 无元件出󳇮次数
󰌓示󲢺吸嘴吸附元件󰋋所生的无元件󳇮󲣄次数。
Ea14716 Unit log -Nozzle ID -No PartsError Par
The ratio of "No Parts Error" for the parts which is installed to the nozzle is
displayed.
This value is calculated by "No Parts Error Counter" / "Pick Up Counter".
履 2 吸嘴 ID 无元件出󳇮率
󰌓示󲢺吸嘴吸附元件󰋋所生的无元件󳇮󲣄次数与送料次数的比率。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 189 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14717 Unit log -Nozzle ID -Nozzle ErrorCounter
The count of "Nozzle Error" for the parts which is installed to the nozzle is
displayed.
履 2 吸嘴 ID 吸嘴出󳇮次数
󰌓示󲢺吸嘴吸附元件󰋋吸嘴生的󳇮󲣄次数。
Ea14718 Unit log -Nozzle ID -Nozzle ErrorPar
The ratio of "Nozzle Error" for the parts which is installed to the nozzle is displayed.
This value is calculated by "Nozzle Error Counter" / "Pick Up Counter".
履 2 吸嘴 ID 吸嘴出󳇮率
󰌓示󲢺吸嘴吸附元件󰋋的吸嘴出󳇮次数与送料次数的比率。
Ea14719 Unit log -Nozzle ID -Date
The date when each nozzle began picking is displayed.
履 2 吸嘴 ID 󲡶󰨠始󰋋󳋉
󰌓示始󲡶󰨠󲢺吸嘴吸附的󰋋󳋉。
Ea14720 Unit log -Nozzle ID -Warning
The state of "Maintenance Warning" for the nozzle is displayed.
履 2 吸嘴 ID 点󰖕警告状
󰌓示吸嘴的点󰖕警告状。
Ea15000 Measure
Please indicate a search area.
󲡶󰨠
󲣌󲢓置搜索范。
Ea15001 Measure
Please input part name, and choose valid part type.
󲡶󰨠
󲣌󲱨入元件名，󲳞有效的元件󱥐型。
Ea15002 Application internal error!
The V2kRtxLib.dll is module that is built by unmatch making.
This application abort.
用󲱄件内部󳇮󲣄!
V2kRtxLib.dll 是用不同的制造方法生成的。
中止󲢺用󲱄件的行。
Ea15003 Image Save
Image save failure.
像保存
像保存失󲧺了。
Ea15004 Image Load
Image Load failure.
像󲱒入
像󲱒入失󲧺了。
Ea15005 Scale Calculation
Scale Calculation failure.
比例󰨠量
比例󰨠量失󲧺了。
Ea15006 Light type
Please check light combination (main/coax/side)
Light type failure. Continue ?
照明󱥐型
󰖕󰒺照明点灯的󱮙合(main/coax/side)
照明󱥐型󳇮󲣄。󱮼󱯂?
Ea15007 Measure
Please input part name.
󲡶󰨠
󲣌󲱨入元件名。
Ea15008 Measure
Please choose valid part type.
󲡶󰨠
󲣌󲳞有效元件󱥐型。
Ea15009 Measure
Need to change part type.
Do you want to change part type ?
元件󲡶󰨠
有必要󲱁󰀷󲡶󰨠󱥐型。
󲱁󰀷?
Ea15010 Measure
Measure failure.
󲡶󰨠
󲡶󰨠󳇮󲣄。
Ea15011 Input image
Input failure.
Check image file path.
像󲱨入
󲱨入󳇮󲣄。
󲣌󰖕󰒺像文件。
Ea16000 Application internal error!
The V2kRtxLib.dll is module that is built by unmatch making.
用󲱄件内部󳇮󲣄!
V2kRtxLib.dll 是用不同的制造方法生成的。
Ea16001 This Board data can not be opened form its current location.
Please copy this data to a machine before opening.
不能在此打󲢺文件。
󲣌把文件制至机器程序所在的位置后再打。
Ea16002 Multiply parts data is not valid. 不存在󲲰行元件分割的元件数据。
Ea16003 An alternative parts loop has already been set for this part. 分割元件的元件数据指定成了替代元件。
Ea16004 Multiply parts data has "Teaching" as its "Position Definition".
Do you want to continue ?
分割元件的元件数据是送料器位置󲡶算"示教"的数据。
󱮼󱯂?
Ea16005 WRITE DATABASE ALL
Data in %s database is changed.
Do you want to write all into the database ?
全部制至数据
%s 数据的内容将改。
确󲲰行全部制?
Ea16006 DATABASE
Set all parts data to Parts-DATABASE has
been completed.
数据信息
已全部制至元件数据信息。
Ea16007 DATABASE
Set all mark data to Mark-DATABASE has been
completed.
数据信息
已全部制至󰓜󲢅数据信息。
Ea16008 DATABASE
No free records are found in the Database.
数据信息
登的数据已没有空󳕛域。
Ea16009 BOARD DATA ERROR
Parts data No.%d Name %s
Setting of [Alignment Type] is [Undefined].
This Parts data isn't registered.
Please set [Alignment Type].
Do you wish to stop Database Matching?
基板程序󳇮󲣄
元件 No.%d 元件名 %s
的 [校正󱥐型] [未󲢓置] 。
󲢺元件没有登。
󲣌󲢓置[校正󱥐型]。
中止数据匹配?
Ea16010 Insert Data Error
Failed to insert a new data.
The maximum(%d) number of lines would be exceeded.
数据插入󳇮󲣄
数据的插入失󲧺了。
超󲲜数据最大数(%d)。
Ea16011 Move parts
Can not insert mounts on machine %d
due to invalid mount data.
Do you wish to skip invalid mount data ?
机器󳋉移
不能在移目的地的机器%d 上生成󲨉装信息的空白行。
是否把无效的󲨉装信息改成跳󲲜，然后移?
Ea16012 Move parts 机器󳋉移
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 190 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
The one to use Fiducialmark is included in Mount Data of this part.
the Fiducialmark number will be reset to 0.
Are you sure ?
󲢺元件的󲨉装数据中包含使用局部基准󰓜󲢅的数据。
󲲮些局部基准󰓜󲢅数据在移目的位置的机器上将更改"0"。
确更改?
Ea16013 Move parts
The one to use Badmark is included in Mount Data of this part.
the Badmark number will be reset to 0.
Are you sure ?
机器󳋉移
󲢺元件的󲨉装数据中包含使用局部坏板󰓜󲢅的数据。
󲲮些局部坏板󰓜󲢅数据在移目的位置的机器上将更改"0"。
确更改?
Ea16014 Ready to move selected parts data. 把󲳞的元件信息移到其他的机器中。
Ea16015 Select the target machine. 󲣌指定移目的地。
Ea16016 Nothing to move to target machine. 移目的地的机器不存在。
Ea16017 Move parts has been completed. 已完成机器󳋉移。
Ea16018 Could not move parts. 未能󲲰行机器󳋉移。
Ea16019 Move parts
Can not insert dotdispense data on machine %d
due to invalid dotdispense data.
Do you wish to skip invalid dotdispense data ?
机器󳋉移
不能在移目的地的机器 %d 中生成正式点胶信息的空白行。
把无效的正式点胶信息更󰀷跳󲲜并移?
Ea16020 Move parts
For Machine %d DotDispense Data No %d
the Fiducialmark number will be reset to 0 (was %d).
Are you sure ?
机器󳋉移
于移机器 %d 的正式点胶信息 %d 号，
将基准󰓜󲢅号的󲢓置从 %d 返回到 0。
󲣌󲲰行基准󰓜󲢅的再󲢓置。
确更改?
Ea16021 Move parts
For Machine %d DotDispense Data No %d
the Badmark number will be reset to 0 (was %d).
Are you sure ?
机器󳋉移
于移机器 %d 的正式点胶信息 %d 号，
将坏板󰓜󲢅号的󲢓置从 %d 返回到 0。
󲣌󲲰行坏板󰓜󲢅的再󲢓置。
确更改?
Ea16022 Multiply parts had been completed. 已完成元件分割。
Ea16023 Failed to execute Multiply parts. 未能󲲰行元件分割。
Ea16024 Renumber parts has been completed. 已按元件号󱓖󲲰行了整理。
Ea16025 It failed in the renumber of the part number.
Please do not save the board data,
because there is a possibility that the mismatch
of the board data has been generated.
Try to do re-reading of board data,
and to edit it again.
以元件号󱓖󲲰行整理的作失󲧺了。
可能基板程序生了不一致的󳇮󲣄，
󲣌不要保存基板程序。
󲣌再次󲣐入基板程序，重新󲲰行󱯫󲱦。
Ea16026 Database matching has been completed. 已行完数据匹配。
Ea16027 Failed to execute Database matching. 未能󲲰行数据匹配。
Ea16028 Parts Database is Expanded. 已充完元件数据。
Ea16029 Illegal Password. 密󱓖不一致。
Ea16030 Parts database is already Expanded. 元件数据已󱮤充󲲜了。
Ea16031 Do you want to set on with reference data? 是否󲢓置有参考数据?
Ea16032 Block Distribution all data.
All contents will be lost! Do you want to continue?
Press [Yes] to continue
将所有数据󲲰行拼展。
原来的数据将失。您确定?
Ea16033 Finished distribution. 展已󱮨束。
Ea16034 Finished distribution return. 展的󲲭原已󱮨束。
Ea16035 More than one machine is registered with the same machine ID.
Confirm the registration information of the machine.
数个机器用相同的机器 ID 登。
󲣌确󲡹机器的登信息。
Ea16036 Failed to insert line.
The maximum number of data (%d) would be exceeded.
未能行行插入。
超󲲜了全部数据的最大数(%d)。
Ea16037 Your YGOS have not registered line.
Please register at least one line to make use of the Board Explorer.
YGOS 中未登任何一个生󱮔。
󲣌用基板󲨙源管理器登一个以上的生󱮔。
Ea16038 Can not save all data.
Line data will be saved to same number of machines in target Line folder,
but there are less machines in the target folder than in the source folder.
Excess data will be lost.
Do you wish to save data to the machines that exist?
不能保存全部数据。
生󱮔数据的保存，是将数据保存在相同号󱓖的机器中。
但保存的生󱮔中不存在相同号󱓖的机器。
此数据将消失。
只保存存在的机器数据?
Ea16039 Failed to read because Board data format is XML. 不能󲣐入 XML 形式的基板程序。
Ea16040 Finished pitch distribute. 󳋉距展已󱮨束。
Ea16041 Pad data does not exist in the inspection object. 󰖕󰒺象中不存在󰷟󱎭数据。
Ea16042 Failed to register a part name. 未能登元件名称。
Ea16043 Do you wish to overwrite Mount Data? 存在󲨉装数据。覆盖保存?
Ea16044 Line insertion was done.
Do you wish to modify a %s number due to the line insertion?
已󲲰行了行插入。
修改由行插入所造成的%s 号󱓖󳇮位?
Ea16045 Deletion is completed.
Do you wish to renumber the %s numbers?
The deleted lines will be removed, remaining lines will be sorted.
已󲲰行了行除。
修改由行除所造成的%s 号󱓖󳇮位?
(所指定除的数据号󱓖将成无效号󱓖。)
Ea16046 If reference data is deleted, block deployment return becomes impossible.
Do you wish to continue?
如果除参考数据不能󲲰行拼展󲲭原。
确要除?
Ea16047 Move parts
Parts can only be moved between the machines
机器󳋉移
在 No.之外行排序󰋋，不能在机器󳋉移。