YAMAHA 报警资料 - 第205页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 205 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 204 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Reference Machine : %s
Reference Component :%s Name : %s
Do you continue?
参照目的位置元件 : %S 号 名称: %S
󱮼󱯂行?
Ea18000 Feeder Overflow!
There is not enough feederbarspace in the line to
accommodate all feeders.
送料器溢出
因基板程序的送料器个数比全部机器的送料器安装空󳋉多，
所以不能󲲰行分配。
Ea18001 Feeder Overflow!
There is not enough feederbar space on those machines
in the line that can handle specific parts.
Machine
Example of specific parts:
- Pick/Mount Action is 'FINE'.
- Dump Way is 'Station'.
- Using Special Nozzle.
etc.
送料器溢出
只能安装在符合条件的装置上的元件所用送料器个数超󲲜了
可安装的送料器空󳋉。
机器名称
*只能安装在符合条件的装置上的元件例
- 吸附/󲨉放作「FINE」
- 弃方法「弃站」
- 使用特殊吸嘴的元件
Ea18002 Feeder Overflow!
There is less feederbar space in the line than is
required for redistribution of the already set parts.
送料器溢出
已󱮤分配的元件的再分配所需的送料器个数超󲲜了
可安装的送料器空󳋉。
Ea18003 Feeder Overflow!
There is not enough feederbar space on the machine to which
parts have been assigned.
送料器溢出
已分配到装置的元件的送料器个数超󲲜了装置可安装
的送料器空󳋉。
Ea18004 Filling Optimization Error
Initialization of feeder filling information failed.
最化󳇮󲣄
送料器配置信息的初始化已失󲧺。
Ea18005 Feeder Overflow!
There were components which cannot be attached
even if it makes filling placement of the feeder.
Please also take into account the feeder positions used by
static components and fixed Board's.
送料器溢出
󲍒已󲲰行送料器󱧼凑配置，但仍存在不能安装的元件。
󲣌修改固定元件、固定基板的󲢓置。
Ea18006 Filling Optimization Error
Reset of feeder filling information failed.
󱧼凑配置最化󳇮󲣄
送料器󱧼凑配置信息的󱮨束理已失󲧺。
Ea18007 Filling Optimization Error
There were components which can be located on no table.
Component data Name
󱧼凑配置最化󳇮󲣄
在数个工作台装置上存在哪个工作台都不能配置的元件。
元件数据 号 名称
Ea18100 Tray Overflow!
There is not enough palette space on those machines
in the line that can handle specific parts.
Machine
托󱎭 溢出排气
只能在符合条件的装置上配置的元件的料架数
超󲲜了可安装的料架数。
机器名称
Ea18101 Tray Overflow!
There is less palette space in the line than is
required for redistribution of the already set palettes.
Machine
托󱎭 溢出排气
已配置元件的再分配所必需的料架数超󲲜了可安装
的料架数。
机器名称
Ea18102 Tray Optimization Error
Initialization of tray parts auto set information failed.
托󱎭 最化󳇮󲣄
托󱎭最化信息的初始化失󲧺了。
Ea18103 Tray Optimization Error
There were tray parts which cannot be attached
even if it makes filling placement of the tray stacker.
Please also take into account the feeder positions used by
static components and fixed Board's.
Machine
Component data Name
托󱎭 最化󳇮󲣄
存在无法决定料架数的托󱎭元件。
󲣌修改固定元件、固定基板的󲢓置。
机器名称
元件数据 号 名称
Ea18104 Tray Optimization Error
Reset of tray parts auto set information failed.
托󱎭 最化󳇮󲣄
托󱎭最化信息的󱮨束理失󲧺了。
Ea18500 The requested plan file does not exist.
Please check the file name.
󲱨入的送料器位置󲢓置文件名不存在。
󲣌确󲡹文件名。
Ea18501 SETUP OPTIMIZER ERROR
Fine is not found.
送料器位置共同󲢓置󳇮󲣄
未能打文件。
Ea18502 SETUP OPTIMIZER ERROR
Matching of a part name went wrong.
送料器位置共同󲢓置󳇮󲣄
元件名的匹配失󲧺了。
Ea18503 SETUP OPTIMIZER ERROR
There are parts that could not be assigned to a machine.
送料器位置共同󲢓置󳇮󲣄
有未分配机器的元件存在。
Ea18504 SETUP OPTIMIZER ERROR
Alternative parts loop includes more than one machine or mounting table.
送料器位置共同󲢓置󳇮󲣄
替代元件跨越了机器或者󲨉装工作台。
Ea18505 SETUP OPTIMIZER ERROR
Machine composition differs from the last plan.
送料器位置共同󲢓置󳇮󲣄
机器的构成与上次送料器位置共同󲢓置不同。
Ea18506 SETUP OPTIMIZER ERROR
Part information differs from the last plan.
送料器位置共同󲢓置󳇮󲣄
元件信息与上次送料器位置共同󲢓置不同。
Ea18507 Feeder which is not displayed has already existed.
If processing is continued as it is, it may become the cause of interference of feeder.
Is processing continued as it is?
已存在送料器，󲢺送料器只不󲲜没有󰌓示。
如果󱮼󱯂理，可能造成送料器互相干。
󱮼󱯂󲢺理?
Ea18508 Board file is not found.
PATH : %s
BOARD : %s
没找到基板文件
路径 : %s
基板名: %s
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 205 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
TYPE : %s 󱥐型 : %s
Ea18509 It is going to update the board under present editing.
Do you want to continue processing as it is?
正要更新正在󱯫󲱦中的基板。
仍然󱮼󱯂󲢺理?
Ea18510 The invalid set position number was set up.
Do you want to move feeder to un-arranging?
󲢓置的安装位置号󱓖无效号󱓖。
是否将送料器移至未󲢓置安装送料器的位置?
Ea18511 BOARD SAVE
Board %1 is changed.
Do you wish to save changes?
基板保存
基板%1 已更改。
保存?
Ea18512 The board data is already opened for editing and now is re-opened.
If you proceed the edit changes will be lost and
the board data will revert to the previously saved
contents.
Proceed?
正在将󱯫󲱦中基板用基板󱯫󲱦器󱯫󲱦。
如果依此󱮼󱯂行，基板󱯫󲱦器将启󱯫󲱦前的内容。
是否󱮼󱯂󲲰行理?
Ea18513 This board is already added.
Board Name : %1
󲢺基板已󱮤添加。
基板名称 : %1
Ea18514 Failed to add boards to the plan.
Please use less than %d boards.
The present number of boards is: %d
The number of additional schedule boards : %d
基板添加失󲧺了。
󲣌将󲲰行送料器位置󲢓置的基板󲣘整%d 个基板以内。
目前的送料器位置󲢓置基板数: %d 基板
󳕙󲡶添加的基板数: %d 基板
Ea18515 There are too many boards.
The number of boards which can be treated
with a common plan sheet is up to 100 boards.
The present number of plan boards : %d
基板数󲲜多。
可在送料器位置共同󲢓置工作表中使用的基板数只能在 100 之内。
目前的送料器位置󲢓置基板数：%d 基板
Ea18516 GROUP board creation went wrong. GROUP 基板生成已失󲧺。
Ea18517 Parts will exceed the maximum number. 元件将超出最大数。
Ea18518 Part division was ended normally. 元件分割正常󱮨束了。
Ea18519 Part division went wrong. 元件分割失󲧺了。
Ea18520 There are too many boards or plan group. 基板数或送料器位置󲢓置󱮙数󲲜多。
Ea18521 When you move parts between machines
"Fiducial"
"Badmark"
These parameters become 0.
󲡾元件移在机器之󳋉，
·局部基准󰓜󲢅
·局部坏板󰓜󲢅
的参数 0。
Ea18522 It failed in the output of Plan Load file. 󲡶划󲧴荷文件的󲱨出失󲧺了。
Ea18523 It failed in the output of Production Plan file. 生󲡶划文件的󲱨出失󲧺了。
Ea18524 Do you want to save the folder path now selected?
New Folder Path : [%s]
送料器位置󲢓置文件的文件路径已更改了。
可以保存?
新文件路径 : [%s]
Ea18525 WARNING
Some of the following Parts can't be use as Common Plan.
So, number that uses the Parts increase.
Because of either of the following reasons.
- Parts can't be moved between machines.
- There is a restriction by the Parts Group Number.
Plan Group :%d
Parts Name :%s
Do you want to continue?
警告
元件的使用数量将增加。
理由:
由于机器󳋉元件不能移或受元件󱮙号󱓖的限制,
使得下列元件的一部分(或全部)不能作送料器共同󲢓置的象使用。
󲢓置󱮙 :%d
元件名 :%s
需要󱮼󱯂行󲢺理?
Ea18526 CREATE GROUP BOARD ERROR
The problem occurred by processing that added the following Board
to the Group Board.
When you allocate the Parts Group Number in Parts of the Group Board again,
Part Group Number used exceeds the max value(99).
Plan Group :%d
Board Name :%s
--- COUNTERMEASURE ---
- Remove the above Board from Plan Group.
- Set the Part Group Number only when necessary.
GROUP 基板的生成󳇮󲣄
在 GROUP 基板中添加下列基板󰋋，
GROUP 基板的元件重新分配󱮙号󱓖，
󱮙号󱓖会超󲲜最大(99)。
󲢓置󱮙 :%d
基板名 :%s
解决法∶
·减少󲢓置󱮙内的基板数。
·只需要的元件󲢓置元件󱮙号󱓖。
Ea18527 CREATE GROUP BOARD ERROR
The error occurred by processing that added the following Board
to the Group Board.
Plan Group :%d
Board Name :%s
--- COUNTERMEASURE ---
Remove the above Board from Plan Group.
GROUP 基板的生成󳇮󲣄
在 GROUP 基板中添加下列基板󰋋，生了󳇮󲣄。
󲢓置󱮙 :%d
基板名 :%s
解决法:
从󲢓置󱮙中除󲢺基板。
Ea18528 PARTS GROUP NUMBER ERROR
Alternative Parts are specified for the following Parts,
but two or more Parts Group Numbers are set to Parts in Alternative Loop.
Please set same Parts Group Number to all parts in the Alternative Loop.
Board Name :%s
Parts No. :%d
Parts Name :%s
元件󱮙号󱓖󳇮󲣄
下列元件已指定替代元件，
但替代循󱂄中的元件的󱮙号󱓖却󲢓置成了数个。
󲣌将替代循󱂄中的元件全部󲢓置相同的󱮙号󱓖。
基板名称 :%s
元件号󱓖 :%d
元件名称 :%s
Ea18529 PARTS GROUP NUMBER ERROR
There is a problem in Parts Group Number of following Board.
元件󱮙号󱓖󳇮󲣄
下列基板的󱮙号󱓖󲢓置󳇮󲣄。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 206 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Please correct the Board Data so that there is no problem
in the order of Parts Group Number between machines or between stages.
Board Name :%s
机器󳋉或基板台之󳋉的󱮙号󱓖不能有越号󱂅象。
󲣌修改基板程序。
基板名 :%s
Ea18530 ALTERNATIVE LOOP ERROR
There is a problem in Alternative Loop of following Parts.
Please set Alternative Loop correctly.
Board Name :%s
Parts No. :%d
Parts Name :%s
The following causes can be considered.
- There are Parts for which Alternative Parts are not specified.
- Parts specified for Alternative Parts don't exist.
替代循󱂄󳇮󲣄
下列元件的替代循󱂄有󳋃󳕭。
󲣌正确󲢓置替代循󱂄。
基板名称 :%s
元件号󱓖 :%d
元件名称 :%s
󳇮󲣄原因:
·存在没有指定替代元件的元件
·指定替代元件的元件并不存在
Ea18531 CREATE GROUP BOARD ERROR
The Group Board can't be created for the following reason.
- The number of Parts that should be registered
in the Group Board of the following Plan Group
exceeds the limit.
Plan Group :%d
--- COUNTERMEASURE ---
Decrease number of Boards in Plan Group.
GROUP 基板的生成󳇮󲣄
登在下列󲢓置󱮙内的 GROUP 基板中的元件数
超󲲜了生󱮔可以生的元件数的上限。
不能生成 GROUP 基板。
󲢓置󱮙 :%d
解决法:
减少󲢓置󱮙内的基板数量
Ea18532 Warning: Optimization Execute
It is Automatically overwritten by the execution board name
for Optimization at the time of same name save.
Do you wish to continue?
警告:最化的行
以相同名称󲲰行保存󰋋，
将以最化行的基板名称自󲲰行覆盖保存。
󱮼󱯂󲲰行理?
Ea18533 Now interrupted reading the Board data with database matching.
Do you want to abort it?
[Yes] Abort to read with matching just now
[No] Resume to read without database matching after now
[Cancel] Return to the database matching dialog
数据匹配和基板程序的󲣐入于󰍗停状。
中断基板程序的󲣐入?
[是] 立即中断基板程序的󲣐入。
[否] 󱮼󱯂󲣐入基板程序，但在此后的理中不再󲲰行数据匹配。
[取消] 返回数据匹配画面。
Ea19000 Target File is not set yet. 未󲢓置󲱁󰀷源的文件名。
Ea19001 Font File is not set yet. 未󲢓置󲱁󰀷󱓖文件名。
Ea19002 Result Board name is illegal or empty. 未󲢓置基板名或者包含不正确的文字。
Ea19003 Output Line is not registered. 󲱁󰀷目的位置的生󱮔没有登。
Ea19004 Output Machine is not registered. 󲱁󰀷目的位置的机器没有登。
Ea19005 Conversion finished. 󲱁󰀷已󱮨束。
Ea19006 Conversion finished. Do you wish to open the converted Board data? 󲱁󰀷已󱮨束。
打󲱁󰀷后的基板程序?
Ea19007 Conversion Failed. Please check font file. 󲱁󰀷已󱮨束。
󲣌确󲡹 FONT 文件等的󲢓置。
Ea19008 The same name of board data is already existed.
For the output machine, the board data will be overwritten.
For other machines,
to delete the same name board, select "Yes".
to keep the board data in other machine, select "No"
󲢺基板名称已󱮤存在。
󲱁󰀷目的位置的机器程序将被覆盖保存。
要除其他机器内存在的同名基板󰋋，󲣌󲳞"是"，
要保留其他机器内存在的同名基板󰋋，󲣌󲳞"否"。
Ea19009 This HardWare-key is only for machine-evaluation.\nRemove this, and attach
correct YGOS HardWare-Key to printer port.
您所插入的󲱄件󳇖是󲨉片机󲢙价用而准的。
󲣌插入 YGOS 用的正确󲱄件󳇖。
Ea19010 This HardWare-key has not registered this option. 您所插入的󲱄件󳇖中，没有可以使用此功能的󲳞󳕎。
Ea19011 HardWare-Key Access Error
No HardWare-key is attached to parallel port.
󲱄件󳇖理󳇮󲣄
󲱄件󳇖没有插入。
Ea19012 A database number has been entered.
Perform a Set from Database All to copy the contents
of the Database to the Board data.
已󲢓置数据号󱓖。
在基板程序中反映数据󲢓置内容，󲣌在󱯫󲱦器中󲲰行
数据全部信息的初始化。
Ea19013 ASCII conversion illegal character " , was found !!
" , is changed to ^ .
在 ASCII 文件中存在不能󲱁󰀷的文字 " , 。
" , 将󲱁󰀷成 ^ 。
Ea19014 There were illegal characters, such as half-width square Japanese syllabary
and full-width character!!
Remove illegal character that machine can not use.
包含的半角片假名和全角等机器不能使用非法文字。
󲱁󰀷󱮨束后，󲣌除非法文字。
Ea19015 Too many parts records!!
Parts number is more than maximum size machine can read.
元件的󲢅数目已超󲲜机器能󲣐入的最大数目。
󲣌在分配元件数据后，行机器󲣐入。
Ea19016 Conversion finished.
A Database number has been set.
When the converted Board data is opened,
the contents of the Database will be copied to the Board data.
Do you wish to open converted Board data?
已󱮨束󲱁󰀷。
数据号󱓖已󲱁󰀷。
照旧打基板程序，将反映数据的󲢓置内容。
是否打󲱁󰀷后的基板程序?
Ea19017 No license for this option. 不存在使用󲢺󲳞󳕎的󲢍可󲢖。
Ea19018 No mounting machine in the line.
Please switch to a line with a mounting machine.
󲢺生󱮔中没有可以󲲰行󲨉装的机器。
󲣌更生󱮔后重新行。
Ea19019 Conversion stopped due to a conversion error.
Please check the conversion for the 'Data set' shown.
因󲱁󰀷󳇮󲣄而被迫中断。
󲣌确󲡹"取得数据"󳕎目。
Ea19100 No file is selected. 所󲳞的文件不存在。
Ea19101 VIOS Board data does not exist. VIOS 基板文件不存在。
Ea19102 Failed to remake VIOS Board file table. VIOS 基板文件列表的更新已失󲧺。