Maintenance Reference-Chinese(SM320) - 第116页

Samsung Component Placer SM320 Maintenance Refer ence  基板状态诊断 LED 信息 LED ON DESCRIPTION Remark LED ON DESCRIPTION Remark LED1-L SKEW F AUL T INT ENABLE LED1-H N.C LED2-L SKEW CHECK ENABLE LED2-H OP INDICA TING LED LED3-…

100%1 / 129
控制单元检验
输出 (OUTPUT) – Y1, Y2 SERVO AMPLIFIER PART
PIN NO. DEF. DESCRIPTION 备注
A1, B1 Y1(Y2)_CW Y1(Y2 ) Axis CW Positive Signal
A2, B2 Y1(Y2)_CW# Y1(Y2) Axis CW Negative Signal
A3, B3 Y1(Y2)_CCW Y1(Y2) Axis CCW Positive Signal
A4, B4 Y1(Y2)_CCW# Y1(Y2) Axis CCW Negative Signal
A5, B5 Y1(Y2)_CLR Y1(Y2) Axis Counter Clear Positive Signal
A6, B6 Y1(Y2)_CLR# Y1(Y2) Axis Counter Clear Negative Signal
A7, B7 +COM +24VDC I/O Power
A8, B8 Y1(Y2)_SON_2# Y1(Y2) Servo-On Signal (To SERVO AMP.)
A9, B9 Y1(Y2)_SP1 Y1(Y2) Axis Output 1 Signal
A10, B10 Y1(Y2)_SP2 Y1(Y2) Axis Output 2 Signal
A11, B11
Y1(Y2)_ARM_RS
T#
Y1(Y2) Axis Alarm Reset Signal
A12, B12 Y1(Y2)_ARM_1# Y1(Y2) Axis Alarm Signal
A13, B13 -COM +24VDC I/O Power
A14, B14 Y1(Y2)_INP Y1(Y2) Axis In-Position Signal
A15, B15 -COM +24VDC I/O Power
A16, B16 Y1(Y2)_PA_2
Y1(Y2) Axis Encoder Phase A Positive
Signal
A17, B17 Y1(Y2)_PA_2#
Y1(Y2) Axis Encoder Phase A Negative
Signal
A18, B18 Y1(Y2)_PB_2
Y1(Y2) Axis Encoder Phase B Positive
Signal
A19, B19 Y1(Y2)_PB_2#
Y1(Y2) Axis Encoder Phase B Negative
Signal
A20, B20 Y1(Y2)_PZ_2
Y1(Y2) Axis Encoder Phase Z Positive
Signal
A21, B21 Y1(Y2)_PZ_2#
Y1(Y2) Axis Encoder Phase Z Negative
Signal
A22, B22 GND +5VDC Power(Common Power With VME)
A23, B23 N.C N.C
A24, B24 +5VDC +5VDC Power(Common Power With VME)
A25, B25 N.C N.C
A26, B26 +5VDC +5VDC Power(Common Power With VME)
A27, B27 +5VDC +5VDC Power(Common Power With VME)
A28, B28 Y1_CS Not Used.
A29, B29 Y1_H_OFF Not Used
CN3
A30, B30 Y1_O_HEAT Not Used
7-21
Samsung Component Placer SM320 Maintenance Reference
基板状态诊断LED信息
LED ON DESCRIPTION Remark LED ON DESCRIPTION Remark
LED1-L
SKEW FAULT INT
ENABLE LED1-H N.C
LED2-L
SKEW CHECK
ENABLE LED2-H
OP INDICATING
LED
LED3-L SKEW CHECK CLR LED3-H N.C
LED4-L Y2_CNT_CLR LED4-H N.C
LED5-L Y1_CNT_CLR LED5-H N.C
LED6-L Y2_CNT_ENABLE LED6-H N.C
LED7-L Y1_CNT_ENABLE LED7-H N.C
SWITCH 及 JUMPER SETTING信息
SWITCH1 DESCRIPTION Remark SWITCH1 DESCRIPTION Remark
SW 1 OFF SW 2 OFF
SW 3 OFF SW 4
OFF
SW 5 ON SW 6
ON
SW 7 ON SW 8 ON
SWITCH2 DESCRIPTION Remark SWITCH2 DESCRIPTION Remark
SW 1 OFF SW 2 ON
SW 3 OFF SW 4
OFF
SW 5
OFF
SW 6
OFF
SW 7
OFF
SW 8
OFF
JUNPER DESCRIPTION Remark JUMPER DESCRIPTION Remark
JP2 2 – 3 Connected JP3 1 – 2 Connected
JP4 1 – 2 Connected JP5 2 – 3 Connected
7-22
控制单元检验
7.3.8. VISION MUX.(INTERFACE) Board
给使用于本设备的6个Fly Camera和Fiducial Camera及2个Fix Camera 提供Sync.
Signal，总共9个 Camera中输入的Analog Image Signal传达给Vision Grabber。
.
使用的电源
外部输入电源: 无须输入其他电源。.
内部使用的电源: +5.0VDC, +12VDC
主要功能说明
CON1 (HIROSE DB-15P/FR-100) – Fiducial Camera Part
Pin ON. Signal Description Pin ON. Signal Description
1 GND 2 +12VDC
3 GND 4 M2_VID2_IN1
5 GND 6 M2_Hsync_2
7 GND 8 N.C
9 GND 10 +12VDC
11 GND 12 M2_VID2_IN2
13 GND 14 M2_Vsync_2
15 GND
7-23