00198711-01_UM_X-Serie-S_EN.pdf - 第107页

Instruction manual SIPLACE X-Series 3 Technical data and assemblies From software version 713.0 Edition 11/2019 3.2 Ambient conditions and connection values 107 3.1.7 Component supply 3 3.2 Ambient conditions and connect…

100%1 / 360
3 Technical data and assemblies Instruction manual SIPLACE X-Series
3.1 Performance data From software version 713.0 Edition 11/2019
106
3.1.6 PCB conveyor data SIPLACE X2 S / X3 S / X4 S / X4i S
3
Single conveyor Flexible dual con-
veyor
Dual conveyor in sin-
gle conveyor mode
Board dimensions (length x width)
*a
X2 S / X3 S / X4 S - standard 50 mm x 50 mm to
450 mm x 685 mm
*b
50 mm x 50 mm to
450 mm x 320 mm
50 mm x 50 mm to
450 mm x 600 mm*
b
X2 S / X3 S / X4 S - long board
*c
50 mm x 50 mm to
850 mm x 685 mm*
b
50 mm x 50 mm to
850 mm x 320 mm
50 mm x 50 mm to
850 mm x 600 mm*
b
X4i S - standard 50 mm x 50 mm to
450 mm x 685 mm*
b
50 mm x 50 mm to
380mm x 320mm
*d
50 mm x 50 mm to
450 mm x 600 mm*
b
X4i S - long board
*c
50 mm x 50 mm to
850mm x 685mm*
b
50 mm x 50 mm to
760mm x 320mm*
d
50 mm x 50 mm to
760 mm x 510 mm*
d
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 148
PCB weight
*e
Max. 10.0 kg
*f
Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Single conveyor
Dual conveyor
*g
< 1.5 seconds
0 seconds
*)a Please observe the max. length of the board of 410 mm when using Smart Pin Support.
*)b Board width up to 560 mm as standard. Board widths up to 685 mm available on request.
*)c With input/output conveyor only
*)d Full functionality only up to a size of 380 mm x 320 mm. Any restrictions incurred for other board sizes will be automatically
taken into account in SIPLACE Pro.
*)e The board weight value refers to the weight of the board plus the weight of the components.
*)f Standard 3.0 kg. Board weight up to 10.0 kg on request.
*)g 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Instruction manual SIPLACE X-Series 3 Technical data and assemblies
From software version 713.0 Edition 11/2019 3.2 Ambient conditions and connection values
107
3.1.7 Component supply
3
3.2 Ambient conditions and connection values
3.2.1 Ambient conditions for packaging, transportation and storage
3
3.2.2 Environmental conditions for operation
3
Component supply Tracks occupied
4 component trolleys X on the SIPLACE X2 S / X3 S / X4 S
4 component trolleys X on the SIPLACE X4i S
160 feeder modules, each with 8 mm X
148 feeder modules, each with 8 mm X
Technical data
Tape reel diameter
Standard
Maximum
to 432 mm (17“)
483 mm (19“)
Component trolley changeover time < 1 minute
Temperature range Between -25°C and 55°C
Atmospheric humidity Up to 95%
Ambient pressure Up to 3000 m height without pressure equalization
Room temperature Between 15°C and 35°C
Atmospheric humidity 30% to 75%
(on average not higher than 45%, so that there is no risk of
condensation on the placement machine.)
Ambient pressure > 750 mbar (corresponds to 1700 m above mean sea level)
3 Technical data and assemblies Instruction manual SIPLACE X-Series
3.2 Ambient conditions and connection values From software version 713.0 Edition 11/2019
108
3.2.3 Compressed air supply and compressed air specification
3
Compressed air supply
Compressed air pressure val-
ues
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Compressed air connection R 3/4" inner thread (pipe thread) with 1/2" hose connection
Compressed air consumption
*a
Placement head configuration
*b
Compressed air
consumption
with vacuum pump
*c
Compressed air con-
sumption
without vacuum
pump
*d
SIPLACE X4i S / X4 S
C&P20 P/C&P20 P/C&P20 P/C&P20 P
C&P20 P/C&P20 P/CPP/CPP
C&P20 P/C&P20 P/TH/TH
C&P20 P/C&P20 P/CPP_H
*e
/TH
CPP/CPP/CPP/CPP
CPP/CPP/CPP_H/TH
CPP/CPP/TH/TH
CPP/TH/TH/TH
TH/TH/TH/TH
260 Nl/min
370 Nl/min
330 Nl/min
350 Nl/min
480 Nl/min
460 Nl/min
440 Nl/min
420 Nl/min
400 Nl/min
990 Nl/min
720 Nl/min
680 Nl/min
700 Nl/min
480 Nl/min
460 Nl/min
440 Nl/min
420 Nl/min
400 Nl/min
SIPLACE X3 S
C&P20 P/C&P20 P/C&P20 P
C&P20 P/C&P20 P/CPP
C&P20 P/C&P20 P/TH
CPP/CPP/CPP
CPP / TH
CPP/TH/TH
TH/TH/TH
185 Nl/min
230 Nl/min
230 Nl/min
360 Nl/min
340 Nl/min
340 Nl/min
300 Nl/min
720 Nl/min
600 Nl/min
590 Nl/min
360 Nl/min
340 Nl/min
340 Nl/min
300 Nl/min
SIPLACE X2 S
C&P20 P / C&P20 P
C&P20 P/CPP
C&P20 P/TH
CPP / CPP
CPP / TH
TH / TH
130 Nl/min
185 Nl/min
165 Nl/min
240 Nl/min
220 Nl/min
200 Nl/min
480 Nl/min
360 Nl/min
340 Nl/min
240 Nl/min
220 Nl/min
200 Nl/min
Compressed air specification according to ISO 8573
Particle size 0.1 µm
Particle density 0.1 mg/m³
Maximum oil content
(class 1)
Particle density 0.01 mg/m³
Pressure dewpoint (class 4) Dewpoint + 3°
*)a Average consumption values. Under normal atmospheric conditions at 20°C and 1013 hPa.
*)b The compressed air values for the C&P20 P and the C&P20 P2 are identical.
*)c Optional
*)d Standard
*)e CPP_H = SIPLACE Multistar CPP in high assembly position