00198711-01_UM_X-Serie-S_EN.pdf - 第114页
3 Technical data and assemblies Instruction manual SIPLACE X-Series 3.3 Dimensions and weight From so ftware version 713.0 Edition 11/2019 114 3.3.3 Center of gravity 3 Fig. 3.3 - 4 Center of gravity in millimeters (exa …
Instruction manual SIPLACE X-Series 3 Technical data and assemblies
From software version 713.0 Edition 11/2019 3.3 Dimensions and weight
113
3.3.2 For a definition of placement performance values
3
Fig. 3.3 - 3 Maneuvering distances of component trolleys in X-Series S placement machines
The maneuvering distances R for the component trolley of the SIPLACE X-Series S placement
machines are as follows:
3
3
3
Maneuvering distance R location position 600 mm
Distance L1: Machine center to outer edge of X component
trolley
1470 mm
Distance L2: Machine center to wall 2070 mm
3 Technical data and assemblies Instruction manual SIPLACE X-Series
3.3 Dimensions and weight From software version 713.0 Edition 11/2019
114
3.3.3 Center of gravity
3
Fig. 3.3 - 4 Center of gravity in millimeters (example of SIPLACE X2 S / X3 S / X4 S shown)
X coordinate 1400 mm
Y coordinate 1050 mm
Z coordinate 630 mm
These center of gravity coordinates relate to placement machines with a PCB conveyor height of
930 mm.
Instruction manual SIPLACE X-Series 3 Technical data and assemblies
From software version 713.0 Edition 11/2019 3.4 Overview of the modules
115
3.4 Overview of the modules
3
3
Fig. 3.4 - 1 Overview of assemblies - example of X3 S shown
(1) Location 1 with component trolley, tape cutter, empty tape duct
(2) Location 2 with component trolley, tape cutter, empty tape duct
(3) Location 3 with COT insert, tape cutter, empty tape duct
(4) Location 4 with COT insert, tape cutter, empty tape duct
(5) Gantry 1 at location 1 with placement head
(6) Multitouch monitor
(7) Board conveyor
(T) Direction of PCB transport
(1)
(2)
(3)
(4)
(6)
(7)
(7)
(5)