00198711-01_UM_X-Serie-S_EN.pdf - 第134页

3 Technical data and assemblies Instruction manual SIPLACE X-Series 3.5 Placement head From software version 713.0 Edition 11/2019 134 3.5.6 SIPLACE T winSt ar for high precision IC placement 3 Fig. 3.5 - 1 1 SIPLACE T w…

100%1 / 360
Instruction manual SIPLACE X-Series 3 Technical data and assemblies
From software version 713.0 Edition 11/2019 3.5 Placement head
133
3.5.5.8 Technical data for SIPLACE MultiStar (CPP)
3
SIPLACE MultiStar (CPP)
with component camera type 30 with component camera type
33
(stationary camera)
Component range
*a
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-
specific standards, the component packaging tolerances and the component tolerances.
01005 to 27 mm x 27 mm 0402 to 50 mm x 40 mm
*b
*)b A diagonal of 69 mm is possible during multiple measurements (e.g. 60 mm x 10 mm).
Component spec.
Max height
*c
Max. height
*d
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
*)c CPP head: In low installation position (stationary component camera not possible).
*)d CPP head: In high installation position
6.0 mm
8.5 mm
250 µm
100 µm
*e
/ 200 µm
*f
250 µm*
e
/ 350 µm
140 µm*
e
/ 200 µm
f
0.4 mm x 0.2 mm
27 mm x 27 mm
4 g
20 g in Pick&Place mode
*)e For components < 18 mm x 18 mm.
*)f For components ≥ 18 mm x18 mm.
15.5 mm
*g
300 µm
150 µm
350 µm
200 µm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
20 g in Pick&Place mode
*)g With OSC package
Set-down force 1.0 - 15 N*
g
1.0 - 15 N*
g
Nozzle types 20xx, 28xx 20xx, 28xx
X/Y accuracy
*h
*)h The accuracy values fulfill the conditions in the SIPLACE scope of supply and services.
± 41 µm/3σ ± 34 µm/3σ
Angular accuracy ± 0.20° / 3σ
*i
, ± 0.38° / 3σ
*j
*)i Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)j Component dimensions smaller than 6 mm x 6 mm.
± 0.14° / 3σ
Illumination level 5 6
3 Technical data and assemblies Instruction manual SIPLACE X-Series
3.5 Placement head From software version 713.0 Edition 11/2019
134
3.5.6 SIPLACE TwinStar for high precision IC placement
3
Fig. 3.5 - 11 SIPLACE TwinStar for high precision IC placement
3
(1) Pick&Place module 1 (P&P1) - the TwinStar consists of 2 Pick&Place modules
(2) Pick&Place module 2 (P&P2)
(3) DP axis
(4) Z axis drive
(5) Incremental distance measuring system for the Z axis
Instruction manual SIPLACE X-Series 3 Technical data and assemblies
From software version 713.0 Edition 11/2019 3.5 Placement head
135
3.5.6.1 Technical data Twin Star
SIPLACE TwinStar
with component camera type 33
(fine pitch camera)
with component camera type 25
(flip chip camera)
Component range
*a
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
*b
Max. height
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
*c
25 mm (higher available on request)
300 µm
150 µm
350 µm
200 µm
1.0mm x 0.5mm
55 mm x 45 mm (single measurement)
Up to
200 mm x 125 mm (multiple measure-
ment)
*d
160 g
25 mm (higher available on request)
250 µm
100 µm
140 µm
80 µm
0.6mm x 0.3mm
16 mm x 16 mm (single measurement)
160 g
Set-down force
Standard
With OSC package
1.0 N - 15 N
2.0 N - 30 N
1.0 N - 15 N
2.0 N - 30 N
Nozzle types
*e
5xx (standard)
20xx/28xx + adapter
4xx + adapter
9xx + adapter
gripper
5xx (standard)
20xx/28xx + adapter
4xx + adapter
9xx + adapter
gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
*f
± 28 µm/3σ ± 22 µm/3σ
Angular accuracy ± 0.05° / 3σ, ± 0.05° / 3σ
Illumination level 6 6
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
*)b If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be re-
stricted .
*)c If standard nozzles are used
*)d Depending on the component dimensions and component infeed, other restrictions may also apply, which SIPLACE Pro
will automatically take into account.
*)e Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
*)f The accuracy values fulfill the conditions in the SIPLACE scope of supply and services.