00198711-01_UM_X-Serie-S_EN.pdf - 第26页

1 Introduction Instruction manual SIPLACE X-Series S 1.2 Placement machine description From software version 713.0 Edition 11/2019 26 There are four locations available for supplyi ng component s. These can be fitted wit…

Instruction manual SIPLACE X-Series S 1 Introduction

From software version 713.0 Edition 11/2019 1.2 Placement machine description

1.2.4 SIPLACE X2 S

Fig. 1.2 - 4 SIPLACE X2 S placement machine

The SIPLACE X2 S placement machine is distinguished by

– High precision,

– Intelligent placement optimization,

– Intelligent configuration strategies,

– Placement performance up to the high end process range

Three placement methods are possible for processing the components:

– Collect&Place,

– Pick&Place and

– A combination of Collect&Place and Pick&Place (mixed mode).

The SIPLACE X2 S placement machine has two placement areas, one single conveyor or one

dual conveyor. Two boards can be placed at the same time on dual conveyors.

1 Introduction Instruction manual SIPLACE X-Series S

1.2 Placement machine description From software version 713.0 Edition 11/2019

There are four locations available for supplying components. These can be fitted with component

trolleys and configured with up to 40 tracks.

The SIPLACE X2 S placement machine has two gantries. The gantry in placement area 1 points

to location 4. The gantry in placement area 2 points to location 2.

These can be quickly and accurately positioned by linear motors, moving independently of one

another in the X and Y directions.

1.2.4.1 Overview of placement head configuration

CPP_H = SIPLACE Multistar CPP in high assembly position

CPP_L = SIPLACE Multistar CPP in low assembly position

Placement area 1 Placement area 2

C&P20 P C&P20 P

C&P20 P CPP_L

C&P20 P CPP_H

C&P20 P2 C&P20 P2

C&P20 P2 CPP_L

C&P20 P2 CPP_H

CPP_L CPP_L

CPP_H CPP_H

CPP_L CPP_H

C&P20 P TH

C&P20 P2 TH

CPP_L TH

CPP_H TH

TH TH

Instruction manual SIPLACE X-Series S 1 Introduction

From software version 713.0 Edition 11/2019 1.2 Placement machine description

1.2.5 Placement machine serial number

The serial number of the placement machine can be found on the inside of the machine frame at

location 1.

Fig. 1.2 - 5 Position of typeplate with serial number (example of SIPLACE X2 S / X3 S / X4 S machine shown)

(T) Direction of travel

(1) Typeplate

(1)