00198711-01_UM_X-Serie-S_EN.pdf - 第302页
6 Station extensions Instruction manual SIPLACE X-Series S 6.1 Nozzle changer From software version 713.0 Edition 11/2019 302 6 Fig. 6.1 - 12 Nozzle changer for the C&P/CPP - changing the magazine (1) Lever for raisi…
Instruction manual SIPLACE X-Series S 6 Station extensions
From software version 713.0 Edition 11/2019 6.1 Nozzle changer
301
6.1.3.2 Changing the magazine
Press the lever (item 1 in fig. 6.1 - 12, page 302), to release the magazine from the balls of the
snap fasteners (item 5 in fig. 6.1 - 12
, page 302). Lift the magazine off the base.
6
WARNING
Risk of head crashes with protruding lever
Any lever that is protruding over the magazine (item 1 in fig 6.1 - 12
) can result in a head
crash.
You should therefore make sure that the lever does not protrude over the maga-
zines.
6 Station extensions Instruction manual SIPLACE X-Series S
6.1 Nozzle changer From software version 713.0 Edition 11/2019
302
6
Fig. 6.1 - 12 Nozzle changer for the C&P/CPP - changing the magazine
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) spring pin for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "magazine locked" position
6
PLEASE NOTE
6
Move the locking plate into the "Magazine locked" position.
Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig.
6.1 - 12
, page 302) slide into the centering holes and slot.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Instruction manual SIPLACE X-Series S 6 Station extensions
From software version 713.0 Edition 11/2019 6.1 Nozzle changer
303
Place the magazine on the snap fastener balls (item 5 in fig. 6.1 - 12, page 302).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
6.1.3.3 Position detection
Each nozzle changer magazine has two fiducials for determining the position.
6
Fig. 6.1 - 13 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducials for determining the position
(1)
(2)
(2)