00198711-01_UM_X-Serie-S_EN.pdf - 第77页
Instruction manual SIPLACE X-Series S 2 Operational safety From software version 713.0 Edition 11/2019 2.6 Safety features 77 2.6.2 Hand guard on the board conveyor The hand gua rd on the PCB conveyor pre vents yo u fr o…
2 Operational safety Instruction manual SIPLACE X-Series S
2.6 Safety features From software version 713.0 Edition 11/2019
76
Function 2
If one of the protective covers is opened upwards, the power supply to the gantry axes will be im-
mediately interrupted. The gantry axes stop moving. The message "Close cover" is displayed on
the screen.
Close the protective covers and press the START button (item 1 in fig. 2.6 - 2), to continue
placement.
2
Fig. 2.6 - 2 Position of the start button (white) on the placement machine (example of SIPLACE X4 S shown)
(1) Start button (white) on the placement machine
(2) Stop button (black) on the placement machine
(2)
(1)
Instruction manual SIPLACE X-Series S 2 Operational safety
From software version 713.0 Edition 11/2019 2.6 Safety features
77
2.6.2 Hand guard on the board conveyor
The hand guard on the PCB conveyor prevents you from reaching into the placement machine, in
the event that there is no input/output conveyor extension fitted.
If there is no input/output extension fitted to the input conveyor and/or the output conveyor, make
sure that a hand guard is fitted in its place. This means that a hand guard must be fitted to the
input conveyor of the first placement machine in a line and to the output conveyor of the last place-
ment machine in a line. If a SIPLACE X-Series S placement machine is operated outside the line
and without the input/output extension, make sure that the hand guard is fitted to the input con-
veyor and the output conveyor of this placement machine.
2
Fig. 2.6 - 3 Hand guard on the SIPLACE X4 S placement machine
(1) Hand guard
(1)
2 Operational safety Instruction manual SIPLACE X-Series S
2.6 Safety features From software version 713.0 Edition 11/2019
78
2
2
Fig. 2.6 - 4 Hand guard - inside and outside
(1) Hand guard - view from outside
(2) Hand guard - view from inside
(3) Slots on hand guard for height adjustment - outside
(4) Slots on hand guard for height adjustment - inside
Fit the hand guard (1) to the input conveyor and to the output conveyor.
Use the slots (3) to adjust the height on the outer plate for each product so that nobody can
reach into the board conveyor from below.
Use the slots (4) to adjust the height on the inner plate for each product so that nobody can
reach into the board conveyor from above.
Adjust the height so that the board with the components can be transported safely through
the conveyor system.
2
WARNING
DANGER OF CRUSHING!
If the hand guard is not fitted, reaching into the board conveyor could lead to injuries to
the arms and hands.
Operation of a SIPLACE X-Series S placement machine without an input/output ex-
tension is only permitted with a hand guard fitted to the input and output conveyors.
The operating company is responsible for ensuring that the hand guard is fitted.
PLEASE NOTE
Observe the maximum height of the board with the highest component.
(1)
(2)
(2)
(3)
(4)