ASM贴片机CPP头半年保养 - 第43页
15 6-monthly CPP Lubricate the star bearing 3 min 1 / 2 CAUTION!Refer to safety instructions in user manual before commencing Mainten- ance NOTICE! ESD guidelines are to be followed Tool: T12, T21, T22, T26, T29 Wear Pa…
15 6-monthly CPP Lubricate the star bearing 3 min 1 / 2
CAUTION!Refer to safety instructions in user manual before commencing Mainten-
ance
NOTICE! ESD guidelines are to be followed Tool:
T12, T21, T22, T26, T29
Wear Part:
W16
Consumables:
C11
1 Prepare the multipette. See appendix
"Prepare the multipette"
2 Turn the wheel and adjust 2 µl. 3 Move the head 90° to the right and put the
head stand in the upright position.
4 Remove the nozzle from segment 1 and
aling the segment with the mark at the star
housing.
5 Remove the grub screw. 6 Apply 1 x 2 µl of lubricant and remove the
multipette.
15 6-monthly CPP Lubricate the star bearing 3 min 2 / 2
CAUTION!Refer to safety instructions in user manual before commencing Mainten-
ance
NOTICE! ESD guidelines are to be followed Tool:
T12, T21, T22, T26, T29
Wear Part:
W16
Consumables:
C11
7 Turn the star by one segment (30 de-
grees).
8 Repeat step 6 to 7 for all other segments
for two full star rotations.
9 Mount the lubrication application tool with
the stopper at the side of the star motor.
10 Turn the star full 3 rotations. Lubricator
has to move up and down slightly. Then
remove lubricator.
11 Insert the grub screw. 12 Clean up the multipette. See appendix
"Clean-up the multipette"