00195467-01_Installation Manual Setup Center 2.2 - 第59页

Installation Manual SIPLACE Setup Center 2.2 Step 2 Licence dialog  Read the license agreement. If you agree with the conditions, click I accept ..., otherwise click on I do not accept.... If you select I do not accept …

SIPLACE Setup Center 2.2 Installation Manual

5.3.2 Forced Setup Verification

The Activation-CD contains the activation of the forced setup verification and the component level

indicator.

The following settings can be configured during the installation:

• Configuration of the Splice detection (If not X-machine)

• Deactivation of Fill Level Control for “empty running tracks”

• Deactivation of transition area at packaging changeover

• Activation of locked tracks without scanning

• Setup verification system (only for 408 station-software)

• Traceability data creation

• Manual input of the PCB barcode

Note:

Traceability settings can only be changed, if the Tractability Option at the station is

installed

5.3.2.1 Installing Forced Setup Verification and CLI

You must log in as administrator at the station computer to install the forced setup verification

option.

Insert the CD. The installation starts automatically.

The dialog boxes shown below will be displayed during the installation procedure.

Step 1 Welcom dialog

 Log on as administrator to the station PC

 Place the Activation CD in your CD-ROM drive.

 The Start screen appears.

58 of 90

Installation Manual SIPLACE Setup Center 2.2

Step 2 Licence dialog

 Read the license agreement. If you agree with the conditions, click I accept ..., otherwise click

on I do not accept.... If you select I do not accept ..., the installation procedure will be termi-

nated.

 Click on Next, to continue the installation procedure.

59 of 90

SIPLACE Setup Center 2.2 Installation Manual

Step 3 Configuration of the Splice detection

Note

This dialog will not appear for the X2, X3 and X4 Machines!

 Select the checkbox Splice detection existing, if a splice detection is available.

 Enter the COM Port where Splice detection is plugged in or leave empty the entry field.

 Click Next to continue.

60 of 90